Allcon 10
2Pages

{{requestButtons}}

Catalog excerpts

Allcon 10 - 1

Allcon 10 Construction Adhesive Features ► Bonds nearly all materials ► Single component ► Easy handling ► Solvent-free ► EMICODE EC 1 Plus - very low emission ► Resistant to weather and ageing ► Resistant to many chemicals ► Frost-proof ► Usable with natural stone bekoX-) RUCTION ADHi Benefits of use ► Use with standard caulking gun ► Can be put under stress after just 7 to 10 minutes ► No primer required ► Replaces multiple other adhesives and glues ► Safe to use ► Always the right product to hand ► Opened cartridge can be used up to 10 months; unopened cartridge lasts up to 18 months ► Minimum wastage ► Can be painted and varnished ► Suitable for indoor and outdoor use Areas of application ► Bonding of timber, chip and fibre boards, MDF, coated boards, metals, aluminium, natural or artificial stones, concrete, marble, ceramics, plastics, plasterboards, foam (EPS), hard foam, acrylic, insulation and much

Open the catalog to page 1
Allcon 10 - 2

Construction Adhesive Range of use Designated uses ► Industry ► Trade The surfaces to be bonded must be free from grease, clean and stable; one surface must be permeable. The adhesive reacts with the moisture in the air or in the material by slightly foaming up. Curing can be accelerated by using a water spray. Sand all smooth materials, clean with beko Allclean and lightly moisten with water (approx. 20 g/m2 (0.6 oz/sq yd]]. Join pieces within 3 minutes. Press until product sets. We generally recommend an adhesion test prior to any applications. In the case of incorrect or...

Open the catalog to page 2

All Beko Group Ltd catalogs and technical brochures

  1. PU-UNIVERSAL

    2 Pages

  2. Allbond-Set

    2 Pages

  3. MS-Flex

    2 Pages