Fourtech
8Pages

Fourtech Gas wall hung compact boilers

Ultra compact dimensions Fourtech is the new Baxi boiler distinguished by ultra compact dimensions (730x400x299), easy installation and easiness of use. Fourtech is available in a wide range of models fanned flue or open flue, combi or heating only with an output up to 24 kW. 24 F combi, fanned flue 24 kW Ml 24 combi, open flue 24 kW Ml 1.24 F heating only, fanned flue 24 kW Mil 1.14 F heating only, fanned flue 14 kW Ml 1.24 heating only, open flue 24 kW Ml 1.14 heating only, open flue 14 kW Ml

Fourtech is provided with a wide, backlighted LCD display and seven regulation/programming buttons which allow an easy interacting with the boiler. The dedicated button to enter info MODE grants an easy control of the main parameters. Settings of • regulation of the heating temperature range ( 30-85 or • activation of the solar function can be set directly from the control panel with no need to access the electronics (PCB). In case of connection with an indirect cylinder its temperature can be adjusted directly on the boiler's control panel. Even the diagnostic is easy and sophisticated:...

Special electronics High energy efciency Designed for hard environmental conditions, the new electronics (PCB) has been realized to guarantee the boiler functioning down to 170 V Fourtech boilers, fanned ue models, have obtained the maximum energy efciency achievable thanks to the new combustion chamber: 3 stars according to European 92/42/CEE New ue exit system Grade of protection The standard 90° ue connection ensures an easier stock management of the ue accessories and an increased efciency thanks to the new combustion chamber. Connection to Baxi integrated solar systems Combi models are...

Fourtech Technical features • Digital control panel with wide LCD display • New compact hydraulic group with 3 way electric valve provided with metal bar for a safe installation • ★★★ Energy efciency: the maximum achievable for fanned ue models • Connection to Baxi integrated solar systems option • Compact dimensions: 730x400x299 • Full anti-frost device • 3 way electric valve on the CH return circuit to protect the boiler from temperature shocks and heat peaks • Extractable lter on the CH return circuit to protect the primary exchanger from impurities • Connection to an indirect cylinder...

Fanned Open flue flue Heating only Hydraulic system Steel burner Primary exchanger made of copper pipes protected with anti-corrosion Stainless steel DHW heat exchanger Automatic by-pass Low energy circulating pump with System to prevent pump and 3 way electric valve operating every 24 Central heating relief valve set at 3 bar Thermoregulation system Two heating temperatures possible Built-in climatic regulation (outdoor sensor available as optional] Control system Overheat limit thermostat to protect primary exchanger Hydraulic pressure switch to prevent boiler's operating in event of low...

Flue systems Open flue Fanned Flue Open flue RR Heating system return G 3/4" A Boiler hanging points. Distance between hanging B Distance between hanging points and hydraulic connection Fanned flue Coaxial flue system Dual flue system Max length without Length reduction Length reduction Flue discharge terminal (m) with a 90° bend with a 45° bend 0 (mm) Coaxial duct Separate ducts installation with wind proof terminal installation with chimney terminal

are Baxi strategic aims and ensure compliance with the specific regulations 36061 BASSANO DEL GRAPPA(VI) Italy marKeti ng@> baxi international.com The Company assumes no responsibility for any possible contents mistakes, and reserves the right to mak,e changes in products, due to technical or commercial demands, at any time without notice.