Auriga
8Pages

Single-phase and three-phase inverter air-to-water monobloc heat pumps

Inverter air-to-water monobloc heat pumps Baxi introduces Auriga, the new inverter air-to-water monobloc heat pump range with single-fase and three-fase power supply. The range is characterized by its easy and simple installation. Moreover, the available static pressure of the water pump allows to install the unit in large plants, to cover greater distances from the thermal power station or to install the unit combining it with one or more fan coils. The range is wide and includes 7 models from 5 to 16 kW, single-fase and three-fase releases. Auriga Seasonal energy efficiency Nominal...

Wide range of powers, from 5 to 16 kW introduced to satisfy all the installation needs: heating, cooling and DHW production. Easy to install in different home environments: The available static pressure of the pump allows to face major pressure drops as the one that might occur in large plants or when the unit is combined with a fan coil. Excellent cooling performances Remote control panel: Control of system functions, parameters programming and check. Integration in BMS systems thanks to the Modbus protocol. ErP Energy Labelling: The energy labelling regulation (EU regulation 2017/1369)...

Flow switch Expansion vessel Circulation pump with enhanced head pressure Plate heat exchanger Flow Safety valve Twin rotary DC inverter compressor with internal thermal protection and carter resistance, it is mounted on anti-vibration dumpers and wrapped on an insulating hood to reduce the transmission of noise and vibrations due to operation. Water-refrigerant exchanger: brazed steel plate heat exchanger AISI 316 with polypropylene insulation to prevent the condensation and anti-freeze resistance to avoid the ice formation in the exchanger. Air-refrigerant exchanger: aluminum finned coil...

• Maximum energy efficiency • Monobloc system for heating, cooling and DHW production • Wide operating range: up to -25°C outdoor air temperature in heating mode and up to 46°C outdoor air temperature in cooling mode • Full control of the DHW: up to 60°C DHW temperature production, boiler water temperature control, DHW circulating pump and solar system integration • Suitable to radiand floor heating and fan coil integration • Integrated management with different systems: boiler integration, solar integration, diverter valve management and secondary circuit pump • Smart defronsting thanks to...

Technical data Auriga Heating Rated heat output Outdoor air temperature 7°C – 87 % R.H., water temperature 30/35°C - EN 14511 COP Outdoor air temperature 7°C – 87% R.H., water temperature 30/35°C - EN 14511 Rated heat output Outdoor air temperature 7°C – 87% R.H., water temperature 40/45°C - EN 14511 COP Outdoor air temperature 7°C – 87% R.H., water temperature 40/45°C - EN 14511 Rated heat output Outdoor air temperature 7°C – 87% R.H., water temperature 47/55°C - EN 14511 COP Outdoor air temperature 7°C – 87% R.H., water temperature 47/55°C - EN 14511 Cooling Nominal cooling capacity...

Clearance spaces

36061 BASSANO DEL GRAPPA (VI) Via Trozzetti, 20 marketing@baxi.it www.baxi.it The Company assumes no responsibility for any possible contents mistakes, and reserves the right to make changes in products, due to technical or commercial demands, at any time without notice Baxi S.p.A. 01-20 (E) G