SKYLIGHTS
48Pages

SKYLIGHTS PHOTOVOLTAIC SYSTEM SHED SKYLIGHTS OPENING FRAMES CARATTERISTICHE TECNICHE DESTRATIFICATOR TWISTER DIVISION CHANNEL

BASSO LUCERNARI, LEADING COMPANY IN INNOVATION AND TECHNOLOGY A working environment filled with natural light is more welcoming and has a good effect on staff, improving their productivity. Basso Lucernari has been working in this field for more than thirty years, studying, planning, and producing ventilation and skylight systems specifically for industrial, commercial and public buildings. Basso Lucernari stands for: WIDE CHOICE, as they offer various types of products made to suit clients needs. COMPLETE SERVICE, as they guarantee consultancy during the planning phase and assistance...

PHOTOVOLTAIC SYSTEM SKYLIGHTS CONTROLLED USING RENEWABLE ENERGY Basso Lucernari introduce a brand new product to the sector: skylights which open using a photovoltaic power supply system. The first skylights to open and close via remote control, using clean and renewable energy. The system has some significant advantages: • Works even when electricity is down. • Saves energy. • Saves costs of electrical power supply units (as they are no longer necessary). • Quick to install. • Skylights work immediately after assembly. • Can be used with any type of skylight.

Example of application using flexible photovoltaic module. ACCESSORIES AVAILABLE ON REQUEST ANEMOMETER Automatic closing in case of wind Automatic closing in case of rain Automatic opening and closing at pre-set times. Automatic opening and closing at pre-determined temperatures.

PHOTOVOLTAIC SYSTEM TECHNICAL CHARACTERISTICS Controls the simultaneous opening and closing of one or more skylights by dividing into groups. Uses a remote control which can be programmed for different zones. Pre-set opening and closing with 8 opening/closing cycles during summer and 4 during winter. Rigid or flexible photovoltaic modules made from amorphous silicon produced depending on various needs. Possibility of installing various accessories: Anemometer, pluviometer, timer, thermostat. Control unit, composed of: • Antenna and signal card • Hermetic sealed lead-acid batteries exempt...

ACL SKYLIGHTS ACL SKYLIGHTS LATERAL OPENING Skylights from the ACL series are ideal for each working environment and guarantee daily lighting and ventilation. They can be distinguished for their ease of installation, practicality and reliability over time.

OPENING FRAMES INSTALLATION ON A BASE The opening system consists of two extruded aluminium tubular frames (opening and fixed) made with a natural aluminium alloy UNI 6060, joined by aluminium hinges with stainless steel pins. The opening frame has EPDM rubber sealing to guarantee perfect closing with fixed frames. Opening frame Fixed frame WALL INSTALLATION Opening frame Fixed frame < See opening frames table pg. 30-31

ACL SKYLIGHTS LATERAL OPENING Skylights from the ACL series consist of a base frame made from galvanized steel anchored to the cover and an opening frame operated by an electrically-operated geared motor working at 220V with incorporated limit switch, galvanized steel transmission shaft of diameter 33mm, revolving bearings on balls, galvanized rack and pinion shaft, bronze gears. The cover is made from polycarbonate panes (other materials available on request), connected by aluminium supporting structural profiles. ACL SKYLIGHTS SYSTEM BASE FRAME Galvanized steel White grey steel Other...

EXAMPLE DIMENSIONS ACL skylights are made to measure. The following table gives some examples of possible sizes from a minimum to a maximum. Recommended measurements

OUR TESTS GUARANTEED VENTILATION Our tests show that, in an environment of around 1,000 m, with 4 6 x1.5m ACLs installed, making use of the natural air flow, the air renewal rate will be 0.55/hour. ACL skylights do not need maintenance and save more energy than traditional forced extraction systems. VENTILATION CAPACITY OF ACL SKYLIGHTS Establishment width Establishment length Establishment height Skylights External temperature Internal temperature COEFFICIENT OF OUTFLOW 0.6 OPENING OF SKYLIGHT ONTO ROOF DECK ACL Ventilation capacity (m2/second of outflow) Air renewal rate per hour

ACL SKYLIGHTS FIXED FOR WELL-LIT ENVIRONMENTS ACL Skylights are also available in a fixed version, used when an environment needs light over a greater space. In areas needing ventilation it is possible to use the mixed ACL system (see pg.44), guaranteeing optimum light and air flow. WALL INSTALLATION

ACL SKYLIGHTS INSULATED THERMAL INSULATION IN A WORKING ENVIRONMENT To guarantee a constant temperature in the working environment (e.g. needed for the food sector) it is possible to insulate the skylight by installing shades of various thicknesses, positioned between the cover and the opening frame. Basso Lucernari can offer assistance in the planning phase to find and create the solution according to clients needs. SAFETY NET (ANTI-FALL) All skylights can be fitted with an anti-fall safety net, mosquito net, bird net and anti-break-in net. OPENABLE FRAME SECTION WITH SHADE

CONTINUOUS SKYLIGHTS COVERING The cover is made from sectional thermoformed domes in polycarbonate or polymethacrylate (pmma) synthesis original, exempt from recovery monomer, with mechanical/optical characteristics typical of pure polymer. The dome, single or double walled, can come in crown or pyramid form. A strengthening system is positioned every 300mm subdivided into modular central units and head. The external and internal dome can be either opal or transparent depending on client needs. TOTAL LIGHT MAXIMUM VOLUME SINGLE WALL DOUBLE WALL SINGLE WALL DOUBLE WALL EXTERNAL SUPPORT

CONTINOUS SKYLIGHTS CONTINUOUS SKYLIGHTS FIXED OR OPENING Thermoformed continuous skylights represent the ideal solution for illuminating and ventilating environments in which lighting is as important as appearance. These skylights are made with acrylic or polycarbonate panes. They are fitted with strengthening ribs which guarantee hold, capacity, and strength. They are of a modular design for installation in any type of architectural situation, and premoulded for simple and quick placement. Available with crown or pyramid formed sections.