Cost Saving Greater Safe Working Load BEFORE

BASORFIL Stackable Wire-Mesh Cable Trays 1 Safety edges to prevent cable damage. 2 Full Range of fast fixing accessories. 3 Innovative design patented by BASOR which offers: • Greater flexure resistance. • Greater Safe Working Load. • Excelent aesthetic finish. 4 Quicker and easier assembly: • The trays can be moulded with a simple manipulation to obtain complicated changes in directions. • The cuts have to be performed with aymmetrical-cut wire cutters. • The cut has to be performed as near as possible to the intersection of the wires, in order to obtain a clean cut and a good assembly. CABLE...

Stackable Wire-Mesh Cable Trays H65 DESCRIPTION BASORFIL E-BFR 100X65 BASORFIL E-BFR 150X65 BASORFIL E-BFR 200X65 BASORFIL E-BFR 300X65 BASORFIL E-BFR 400X65 BASORFIL E-BFR 500X65 BASORFIL E-BFR 600X65 To assembly E-BFR H65 cable trays use a quick joint BFR 35 E-BFR 65/105 (2/7271 in EZ, 2/7272 in HDG) on each side of the cable trays. For trays wider than 300 an aditional bolt-staple set shall be used as central union joint (2/4364 in EZ, 2/4360 in HDG). DESCRIPTION BASORFIL E-BFR 200X105 BASORFIL E-BFR 300X105 BASORFIL E-BFR 400X105 BASORFIL E-BFR 500X105 BASORFIL E-BFR 600X105 To assembly E-BFR...

BASORFIL Stackable Wire-Mesh Cable Trays Patented BF-Bolt and a nut DIN 6923. The BF-Bolt is specifically designed by BASOR to form a perfect fit between the wire trays. DESCRIPTION BF STAPLE It is used to mount the divider profile. MULTI UNION JOINT PG DESCRIPTION MULTIUNION JOINT Supplement used in the workplace for construction of accessories (vertical inside/outside, horizontal bend, reduction, etc.) SSC CENTRAL SUSPENSION EZ DESCRIPTION SSC CENTRAL SUSPENSION Each attachment point requires two SSC (upper an lower), one rod and two M8 DIN 6923 nuts (0/0338 in EZ, 0/0338 in HDG). The SSC allows...

BASORFIL Stackable Wire-Mesh Cable Trays UNIVERSAL SUPPORT BOX HDG REF. kg/ud 2/0368 0,28 PG DESCRIPTION UNIVERSAL SUPPORT BOX For fixing the watertight boxess of the leading manufacturers: Legrand, Gewiss, Eunea, etc. For fixing: Square shape 29-70 (mm). Rectangular shape 79x50, 98-128x50, 15-55x82 (mm). Straight line from 30 to 147 (mm). DROP-OUT PLATE PG DESCRIPTION DROP OUT PLATE BF/BFR To assemble drop-out plate with cable trays use a SSC, a M8x25 DIN 933 bolt (0/0310 in EZ) and a DIN 6923 nut (0/0338 in EZ). One B1 bolt set (2/4356 in EZ, 2/6826 in HDG) and one BASORFIL staple (2/0337 in...

BASORSUPPORT Supports for Wire-Mesh Cable Trays FAST FIXING SUPPORT C-SHO FAST FIXING SUPPORT C-SHO FAST FIXING SUPPORT C-SHO SHO/SHOT SUPPORTING PIECE DESCRIPTION FAST FIXING SUPPORT C-SHO No aditional pieces are required to fix wire-mesh cable trays. The design of the brackets, with the T-shaped fixing flap, allows a resistant and easy installation of the trays BASORFIL BFR/BF only using a flat baded screwdriver. For anchoring to the wall, a SHO supporting piece (2/6240 in EZ, 2/6318 in HDG) is necessary. If SHO supporting piece is not used the SWL values fell by 12% and the profile can crash...

BASORSUPPORT Supports for Wire-Mesh Cable Trays PC CLICK HEAD PG kg/ud 0,24 0,24 0,37 The PC click head allows the construction of ceiling supports with PC profile (with single or double profile) using bolts or split pins. To fix the PC profile to the PC click head two bolts or split pins are required. DESCRIPTION PC CLICK HEAD SR/PC M8 BOLT SET 8x80 DIN 94 SPLIT PIN Also, with 2 additional heads and one additional profile, 45 degrees reinforcements can be mounted to increase the resistance of the ceiling support. To attach the PC click head to the rear face of the PC and built the reinforcements,...