Catalogs >
Barco >
MNA-110 ENC DVI

MNA-110 ENC DVI
2Pages

Catalog excerpts

Barco's MNA series comprises adapters to encode and decode video, data and other information (e.g. control signals) to and from IP streams. These medically certified adapters ensure overall connectivity and support for current and legacy video sources. Automated device detection eliminates the need for user interventions when setting up the operating room. Conversion to IP The MNA encoders take in baseband video and non-video data and convert these to IP streams for transportation over a standard high-bandwidth IP network. The MNA decoders reconvert these raw IP packets to DVI video signals and other signals such as USB. End-to-end latency is amazingly short and is guaranteed not to exceed a single frame (< 15 ms). The medical-grade MNA adapters offer: • AV-to-IP conversion at the imaging source • Complete connectivity for current and legacy video sources in the operating room, cath lab or interventional suite • Support for non-video traffic (e.g. keyboard, mouse) • Easy integration via central API provided by Barco's NMS 1.0 software Smooth setup and ease of use

Open the catalog to page 1

Encoder system Power consumption Digital and analog baseband video signals to uncompressed IP video streams Up to 300 Mega Pixels per second (up to 1920 x 1080/60Hz) AES 128 encrypted transmission of all video, data & control signals 1x DVI-SL input 10GE Fiber Optic Interface with SFP+ connector module AVB, IP, IGMP, IGMP snooping, PIM, RTP, RTCP, 802.1q, AES 128b, HTTP(s) USB OTG type A/B USB Type A N/A Supporting HIPAA compliance External 12V Medical Approved PSU < 30W Noise Level Operating temperature Storage temperature Range +5°C to +35°C Temperature change Range -20°C to +60°C...

Open the catalog to page 2