*myarchiexpo

Catalogs
Barco
Extreme network switch

Extreme network switch

Product catalog summary

Product Overview: The Extreme Network Switch is designed for digital operating rooms, offering high-speed connectivity and flexible deployment options.

Network Interface: The switch supports 48 ports with 10GBASE-X SFP+ interfaces, capable of dual-speed operation at 1G/10G. It features auto-detection for 10GbE or 1GbE and allows flexible use of downlink or uplink per port.

Management and Capacity: Includes a 10/100/1000 BASE-T RJ-45 management port and an RJ-45 RS-232 console port. The switch has a full-duplex switching capacity of 48 x 10Gbps and a forwarding latency of less than 5 seconds end-to-end.

Forwarding and VLAN: Supports over 10K MAC address entries, pause frames, jumbo frames, and link aggregation with 802.3ad LACP. It can handle up to 4094 VLANs per switch with 802.1Q VLAN tagging and classification.

Quality of Service (QoS): Implements 802.1p with 8 hardware queues per port, averaging 200KB queue size per port, and is AVB ready with IEEE 802.1AS, Qat, and Qav.

Access Control and Security: Provides over 500 wirespeed ingress and egress ACLs, with rules based on port, MAC, VLAN, and IP. Security protocols include SNMPv3, SSHv2, SCP, and SFTP.

Layer 3 Forwarding: Supports 3K IPv4/IPv6 addresses, IGMP v1/2/3, PIM-DM, PIM-SM, MSDP, and PIM-SSM. It can manage 2000 multicast groups and 4000 IPv4/IPv6 multicast routes.

Management Protocols: Compatible with SNMPv1/2/3, TFTP, SFTP, SCP, and standard MIBs. It supports CLI/Telnet and CLI/SSHv2 for console access.

Mechanical and Environmental Specifications: The switch measures 4.4 cm in height, 44.1 cm in width, and 48.9 cm in depth, with a maximum noise level of 54dB. It operates at altitudes up to 3000m, with humidity levels between 10% and 90%, and temperatures from 0 to 40ºC.

Power and Reliability: Features a 450W AC or DC power supply, with 1+1 load-balanced, hot-swappable units. Power consumption is less than 5W per port at full traffic load, and the MTBF is 18 years at 40ºC.

Certifications: The switch complies with safety standards EN 60950-1, IEC 60950, and CSA 60950, and EMC standards including FCC Class A and CE. It is environmentally compliant with RoHS, China RoHS, WEEE recycling, and REACh.

Note: Specifications are subject to change. For the latest information, visit www.barco.com.

Catalog excerpts

Extreme network switch Network switch for the digital operating room

Open the catalog to page 1

PRODUCT SPECIFICATIONS EXTREME NETWORK SWITCH Network interface Type Amount ■ 1G/10G dual-speed at line rate ■ Auto detection of 10GbE or 1GbE Deployment Management Flexible use of downlink or uplink per port ■ 1x 10/100/1000 BASE-T RJ-45 management port ■ 1x RJ-45 RS-232 Console port Switching capacity Backplane capacity Forwarding latency Throughput Full-duplex switching capacity of 48 x 10Gbps < 50sec E-2-E (L2 and L3) >= 15Mpps per port MAC learning, aging & static MAC config > 10K MAC address entries Special frames ■ Pause frames (802.3x) Link aggregation 802.3ad LACP: 48 groups with max....

Open the catalog to page 2

PRODUCT SPECIFICATIONS EXTREME NETWORK SWITCH Access control ■ ACL lists on port, MAC@, IP@, VLAN ■ Automatic port shutdown ■ ACE counters Control protocols ■ RFC2138/2139 RADIUS RFC1492 TACACS + ■ 802.1x authentication + local authentication ■ Guest VLAN Security protocols ■ SNMPv3, SSHv2, SCP, SFTP RFC 3046 DHCP Option 82 ■ With port and VLAN ID Mechanics Dimensions ■ Height: 4,4 cm (1.73") Max. noise 54dB Fan unit 1+1 hot swappable Operating conditions ■ Altitude: up to 3000m Humidity: 10% - 90%, relative humidity, not condensing ■ Temperature: 0 - 40°C Power supply ■ 450W AC or DC ■ 1+1 load-balanced,...

Open the catalog to page 3

Extreme network switch

Extreme network switch

Catalog excerpts

All Barco catalogs and technical brochures