FLEXIBLE MESH

FLEXIBLE SOLUTIONS Banker Wire’s line of Flexible Mesh patterns provides expanded creative freedom for designers and architects with a material that is as adaptable as its name. The exceptional nature of this mesh allows for uninterrupted expanses of coverage where panelized systems fall short. From free-form hanging to tensioned building facades, Flexible Mesh can be used to create subtle textures, add solar shading, or provide a secure but ventilated barrier, among many other possibilities. The Flexible Mesh product line brings Banker Wire’s famous versatility, quality, and expertise to the...

DELTA 12 PERCENT OPEN 64.0% WEIGHT/SQ FT 1.41 lb 0.49 lb 1.62 lb MAX A (FLEX) DIMENSION UNLIMITED MAX B (RIGID) DIMENSION 216 Inches

DRIFT PERCENT OPEN

PERCENT OPEN

PERCENT OPEN

RIDGE PERCENT OPEN

(ROUND) PERCENT OPEN 50.0% WEIGHT/SQ FT 1.37 lb 0.47 lb 1.56 lb MAX A (FLEX) DIMENSION UNLIMITED MAX B (RIGID) DIMENSION 216 Inches

FLEXIBLE MESH SYSTEMS ROUND THREAD Providing a means of tensioning the mesh, the Round Thread flexible mesh mounting system uses a rod that is inserted inside the spirals, as well as equally spaced eyebolts at both the top and bottom horizontal edges of the mesh. The eyebolts are connected to the rod that is captured within the spiral and provides the means for applying load. All materials are made from T316 stainless steel. A powder coated finish can be applied upon request. The Round Thread flexible mesh mounting system is applicable to the following mesh patterns: Delta, Dune, Drift, Flow,...

FLEXIBLE MESH SYSTEMS FLAT THREAD Providing a means of tensioning the mesh, the Flat Thread flexible mesh mounting system uses a flat bar that is inserted inside the spirals at both the top and bottom horizontal edges of the mesh. Holes are provided at equidistant spacing along the bar where a clevis and pin connect and provide the load. All materials are made from T316 stainless steel. A powder coat finish can be applied upon request. The Flat Thread flexible mesh mounting system is applicable to the following mesh patterns: Delta, Dune, Drift, Flow, Ripple, and Ridge.

FLEXIBLE MESH SYSTEMS LACE Providing a means of tensioning the mesh, the Lace flexible mesh mounting system utilizes a perforated flat bar that matches the spiral wire pitch. The spiral mesh is linked to the flat bar, becoming one. Tensioners are then welded to the flat bar as a means of providing the tensile load. All materials are made from T316 stainless steel. A powder coat finish can be applied upon request. The Lace flexible mesh mounting system is applicable to the following mesh patterns: Delta, Drift, Flow, and Ripple. 16

SLOPE The Slope flexible mounting system is used when the mesh has angled top or bottom edges. Prior to cutting the sloped edge of the mesh, a metal profile is welded to the mesh and is then capped with a U-shaped trim profile. Holes within this edge treatment accept a clevis and pin as means for providing the load. All materials are made from T316 stainless steel. A powder coat finish can be applied upon request. The Slope flexible mesh mounting system is applicable to the following mesh patterns: Delta, Dune, Drift, Flow, Ripple, and Ridge.

FLEXIBLE MESH SYSTEMS WRAP The Wrap flexible mesh mounting system wraps the horizontal ends of the fine spiral mesh to form a sleeve where a tube can be inserted across the width of mesh. From this tube, threaded sockets are equally spaced and provide the load. All materials are made from T316 stainless steel. A powder coat finish can be applied upon request. The Wrap flexible mesh mounting system is applicable to the following mesh patterns: Ripple and Drift. 18

FLEXIBLE MESH SYSTEMS LOOP The Loop flexible mesh mounting system can be used when the design calls for the flexible mesh to hang freely or drape. Alternating rods within the mesh are extended and welded to form a loop. This loop can then facilitate a connection point like a round bar to hang from. The Loop flexible mesh mounting system is applicable to the following mesh patterns: Ripple and Drift.

SECONDARY FINISHES FOR FLEXIBLE MESH POWDER COATING

SECONDARY FINISHES FOR FLEXIBLE MESH To enhance the appearance of your Flexible Mesh we offer Powder Coating and Anodizing Secondary Finishes. Both of these Secondary Finishes can provide a wide range of color options to accent your project. For more information on these finishes and their use in Flexible Mesh, contact us!

A PARTNERSHIP Drawing on 125 years of experience and leadership within the architectural wire mesh industry, Banker Wire knows wire mesh like no other. Combining our proven expertise with the capabilities of Flexible Mesh opens a wider range of products for architects and designers to pull inspiration from. To bring Flexible Mesh to market, we’ve partnered with the Spanish company, Codina Architectural. Together, we will manufacture, engineer, and deliver the highest quality Flexible Mesh and systems available. We are dedicated to providing clients with the next generation of Flexible Mesh and...

BANKER'1' C.I. BANKER WIRE & IRON WORKS 123 W BOXHORN DRIVE MUKWONAGO, WISCONSIN 53149 UNITED STATES OF AMERICA