BCHS.2 80 P

Product catalog summary

Product Specifications
The document details the specifications of water chillers and air-water heat pumps with axial fans. The frame is made of galvanized sheet coated with polystyrene powders. Panels are designed for easy removal to access internal components. The compressor is a revolving spiral scroll hermetic type, with a tandem configuration for certain models. The condenser features copper tubes and aluminum fins, protected by a metal mesh. Axial fans are directly coupled to a 6-pole electric motor with IP 54 protection. The evaporator is made of AISI 316 stainless steel with closed cell foam insulation. Standard condensation control is achieved with a pressure transducer. Protections are in place for both hydraulic and cooling circuits. The electrical panel includes a general disconnecting device and compressor remote control switch. A microprocessor with a self-adjusting regulator is included for optimal operation. Units are factory-tested and supplied with oil and refrigerant.

Versions on Request
Available versions include Basic, Pump only (Reversible versions), and Pump and Tank (Only Cold versions).

Electric Accessories on Request
Options include a serial interface RS485, operation clean contacts, soft starter, and set point compensation according to outside air temperature.

Technical Data
Cooling Power Yield is 8.00 W, with a Cooling Power of 8 kW at A35/W7 and 10.96 kW at A35/W18. The refrigerant type is R410A. Air flow is 4000 cu.m/h. The unit has 1 compressor and 1 fan. Water flow rates are 1377 l/h at A35/W7 and 1886 l/h at A35/W18. The pump useful head is 181 kPa. EER is 2.71 at A35/W7 and 3.58 at A35/W18. ESEER is 2.9 for both conditions. Sound power is 32 db(A) and sound pressure is 63 db(A). The electric power supply is AC, with 1 phase, 230 V, and 50 Hz. Cooling absorption is 2.9 kW at A35/W7 and 3 kW at A35/W18. Starting current is 98.7 A, and nominal current is 22.7 A. The unit weighs 102 kg without packaging, with dimensions of 1080 mm width, 455 mm depth, and 960 mm height. The fitting diameter is 1 UNI ISO 7/1.

Catalog excerpts

BCHS.2 80 P Chillers and heat pumps (with hydronic module) Tamdem SCROLL. R410A. Condensing control. Product specifications Water chillers and airwater heat pumps with axial fans Frame: in galvanised sheet and coated with polystyrene powders (RAL 9003) at 180 °C. Panels: easy to remove allowing full access to internal components. Compressor: revolving spiral scroll hermetic compressor (2 in TANDEM configuration for mod. 482, 552 and 602). Condenser: consisting of a coil with copper tubes and aluminium fins with large exchange surface. The fin block is protected by a metal mesh. Fans: axial fans directly coupled to the 6pole electric motor with external rotor, protection grade IP 54. Evaporator: with brazed plates in AISI 316 stainless steel, insulated with a casing in closed cell foam material. Condensation control: (standard) with pressure transducer. Protections: on hydraulic and cooling circuit. Electrical panel: equipped with general disconnecting device, auxiliary and power circuit protection, compressor remote control switch. Microprocessor: with main functions shown on display, equipped with selfadjusting regulator to allow optimal operation in case of low water content in the system. Test: the units are tested in the factory and supplied with oil and refrigerant. VERSIONS ON REQUEST Basic. Pump only (REVERSIBLE versions). Pump and Tank (ONLY COLD versions).

Open the catalog to page 1

BCHS.2 80 P

BCHS.2 80 P

Catalog excerpts

All Baltur catalogs and technical brochures