Balcony Systems? Juliette Balcony Installation Instructions
Balcony Systems? Juliette Balcony Installation Instructions
- Verify all parts of the order are present.
- Check the height of the glass and ensure it matches the required site specifications.
- Note that indicated sizes refer to standard height and should not be scaled from the drawing.
- Align the bottom track centrally with the window opening.
- Ensure vertical alignment for access to the glazing bead from inside.
- Secure the bottom track brackets firmly to the wall, ensuring horizontal level.
- Measure and mark the correct height for the handrail position using the attached drawing (1100 mm from the top of the track).
- Center the handrail with the window or ensure equal overlap on both sides.
- Secure the handrail firmly to the wall through the brackets.
- Remove any existing glazing beads.
- Place spacers on the bottom track for each glass panel, securing them with silicone.
- Remove any stickers or spacers from the glass.
- Insert glass panels into the handrail slot and lower onto spacers.
- Replace the glazing bead.
- Align glass panels correctly, ensuring proper spacing.
- Insert a 3mm rubber gasket in the bottom track between the glass and glazing bead, using soapy water to ease the process.
- Trim excess rubber.
- Insert two 3mm rubber gaskets on both sides of the handrail, using soapy water if necessary.
Catalog excerpts
Balcony Systems’ Juliette Balcony Installation Instructions © Balcony Systems 2013 www.balconette.co.uk Tel: +44 1342 410411 Fax: +44 1342 410412 Unit 6, Systems House, Eastbourne Road, Blindley Heath, Lingfield, Surrey, RH7 6JP, United Kingdom Check you have all the parts of the order. Check the height of the glass Check the sizes and height against the required height on site making sure they are correct before assembling* *Please note the indicated sizes in this document refer to our standard height. * do not scale from this drawing
Open the catalog to page 1
1. Line up bottom track to be centre with the window opening. Glazing bead 2 . Line up bottom track vertically to allow the access to the glazing bead from the inside.
Open the catalog to page 2
3. When properly lined up fix the bottom track brackets firmly to the wall. (use a level to make sure you are horizontally level) 4. Measure the correct height of the handrail position (use attached drawing) * do not scale from this drawing
Open the catalog to page 3
5. Center the handrail to be centre with window or equal overlap on the two sides. 6. When properly lined up fix the handrail firmly to the wall through the brackets
Open the catalog to page 4
Glazing bead 7. Remove glazing beads if in place. 8. Place two spacers on the bottom track for each glass and use a dab of silicone to let them stay in place.
Open the catalog to page 5
9. Remove any stickers/writing/spacers that are stuck on the glass. 10. Place the glasses in place by inserting them into the slot in the handrail and lowering them onto the spacers.
Open the catalog to page 6
11. Replace the glazing bead.
Open the catalog to page 7
12. Line the glasses up in position so that they are spaced correctly between each other/wall etc. 13. Insert the 3mm rubber gasket in the bottom track between the glass and the glazing bead. (using soap water can ease the process)
Open the catalog to page 8
14. Insert the two 3mm rubber gaskets on both sides of the handrail. (using soap water can ease the process) 15. Trim off excess rubber.
Open the catalog to page 9
© Balcony Systems 2013 www.balconette.co.uk Tel: +44 1342 410411 Fax: +44 1342 410412 Unit 6, Systems House, Eastbourne Road, Blindley Heath, Lingfield, Surrey, RH7 6JP, United Kingdom
Open the catalog to page 10All BALCONY catalogs and technical brochures
Curved Sliding Patio Doors4 Pages
Glass Juliette Balconies1 Page
Sophisticated Glass Railings4 Pages