Flexible acrylic adhesive tape > Optimum crosswise flexibility > Maximum adhesive power at temperatures from as low as -5°C > Serrated - easy to tear off by hand > Soft and adaptable; absorbs component movements Technical details Storage Working temperature Temperature resistance Ageing resistance Natural weathering period cool and dry from -5 °C - 40 to + 100 °C >20 years (under covering) 4 months (without mechanical stress) *Conditions for the twenty-year premium warranty include registering the building object and the Am pack products used. In addition, our products must be used as part of a system. For further details, please see our General Warranty Conditions. Area of application: Tear-resistant but at the same time flexible system adhesive tape for indoor and outdoor use. 60mm: Ideal for airtight and windproof sealing of overlaps, board joints and penetrations. 100mm/150mm: Ideal for airtight and windtight lining of component joints and masking boards on ridges, hips and grooves. Slit liner. 7640442090998 Ampacoll® Flexx pro 60 40m*60mm 10 rolls = 400m 7640442090622 Ampacoll® Flexx pro 100 25m*100mm 6 rolls = 150m

Application photos The surfaces to be bonded must be clean, dry and free of dust and grease. The ambient temperature, the surface temperature and the temperature of the adhesive tape must correspond to the indicated processing temperature. Installed membranes should be stress-free and even. The adhesive tape must be applied stress-free following the uneven surface of the substrate and pressed on firmly. Ampacoll® Flexx pro adheres immediately to the substrate and is largely insensitive to normal weather conditions for four months. Mechanical loads caused by objects being dragged around, intensive...