General Fix non-penetrating fixing system
8Pages

{{requestButtons}}

Catalog excerpts

General Fix non-penetrating fixing system - 1

GENERAL FIX® LIGHTWEIGHT, NON-PENETRATING FASTENING SYSTEM

Open the catalog to page 1
General Fix non-penetrating fixing system - 2

GENERAL FIX® Introduction GENERAL FIX® is a unique, patented, lightweight fastening system for securing roof mounted equipment without penetration of the waterproofing system. Specifically developed as an anchorage device for crystalline photovoltaic panels and amorphous ‘thin film’ modules, GENERAL FIX® is compatible with all roof types. GENERAL FIX® provides a lightweight, secure solution eliminating the need for expensive heavy array support systems that can compromise waterproofing and structural integrity. GENERAL FIX® applies the hook and loop fastening principle developed by VELCRO®,...

Open the catalog to page 2
General Fix non-penetrating fixing system - 3

GENERAL FIX® Philosophy and Benefits The design philosophy of the GENERAL FIX® lightweight, non-penetrative fastening system is to preserve the integrity of the waterproofing, regardless of type, through the elimination of fixings through the roof. GENERAL FIX® facilitates the simple removal of roof mounted equipment such as photovoltaic panels and modules, to permit unrestricted maintenance of the roof waterproofing system in accordance with British Standard recommendations and manufacturer warranty conditions. Approved for application on all roof types: bituminous, synthetic, liquid &...

Open the catalog to page 3
General Fix non-penetrating fixing system - 4

GENERAL FIX® Solutions GENERAL FIX® Flat panel installation Photovoltaic panels are installed on both flat and sloping roofs between strips of GENERAL FIX® and are clamped to the AluFix® aluminium profile with either a universal central or lateral clamp. Raised off the roof the panels are fully ventilated. Panels can be installed either longitudinally or at right-angles to the GENERAL FIX® system and AluFix® aluminium profile. Universal Central Clamp Lateral Clamp GENERAL FIX® Inclined panel installation GENERAL FIX® is attached to the roof as for a flat installation with either the fixed...

Open the catalog to page 4
General Fix non-penetrating fixing system - 5

GENERAL FIX® Application Bituminous membrane installation Panel fixing Photovoltaic panel Aluminium profile VELCRO® hook VELCRO® loop Bituminous SBS membrane Typical bituminous waterproofing system build-up Synthetic membrane installation Panel fixing Photovoltaic panel Aluminium profile VELCRO® hook VELCRO® loop Synthetic PVC/TPO/EPDM membrane Typical synthetic waterproofing system build-up Liquid membrane installation Panel fixing Photovoltaic panel Aluminium profile VELCRO® hook VELCRO® loop Liquid membrane Typical liquid waterproofing system build-up

Open the catalog to page 5
General Fix non-penetrating fixing system - 6

GENERAL FIX® Fast installation GENERAL FIX® is anchored to the roof without penetration; installation is simple and fast. GENERAL FIX® is compatible with most commonly used waterproofing systems and is designed for both new build and refurbishment projects when installing photovoltaic crystalline panels and amorphous modules. GENERAL FIX® must be installed by trained Axtershield Installers to ensure quality installation and compliance with Axter system guarantee criteria. Complete new waterproofing system installation or prepare the existing roof system to receive the GENERAL FIX® Install...

Open the catalog to page 6
General Fix non-penetrating fixing system - 7

GENERAL FIX® Components and Design BandFix® – VELCRO loop tape factory bonded to the surface of a 10 cm wide strip of a high adhesive bituminous or synthetic (PVC, TPO or EPDM) membrane. AluFix® – an aluminium profile, factory bonded with a special aluminium adhesive to a strip of VELCRO® Ultra-Mate hook tape. For amorphous ‘thin film’ photovoltaic modules the hook tape is pre-adhered to the under surface of the module for direct application to the BandFix®. Axter provides a complete design solution for the GENERAL FIX® system to ensure correct implementation into the built environment....

Open the catalog to page 7
General Fix non-penetrating fixing system - 8

Axter specialises in the design and manufacture of high quality, fully integrated robust membranes for roofing including green, brown and photovoltaic systems, structural waterproofing and civil engineering works. Through early involvement in a project, Axter’s team can deliver value engineering to meet all design, specification and budgetary requirements. Further details on the specifications contained in this document can be obtained from Axter Ltd. Axter Limited West Road, Ransomes Europark, Ipswich, Suffolk, IP3 9SX Tel: 01473 724056 Fax: 01473 723263 E-mail: info@axterltd.co.uk Web:...

Open the catalog to page 8

All AXTER catalogs and technical brochures

  1. HYDROPACK

    6 Pages

  2. FORCE LINE

    8 Pages