Catalogs >
Axess TMC >
RFID/2 A Family of Compact "wall-mounted" proximity readers

RFID/2 A Family of Compact "wall-mounted" proximity readers
1Pages

Catalog excerpts

RFID/2 A Family of Compact "wall-mounted" proximity readers - 1

904 RFID/2 904 RFID/2 A family of compact “wall-mounted” proximity readers User signals Buzzer (125 KHz versions only). Red LED and Green LED, controlled by the host device. (The red is also controlled by the reader in the not LEGIC® versions). Reading distance From 30 to 150mm depending on the RFID technology. Wall mounting A wide choice of proximity technologies, read-only and read/write modules: Two front-pass-through holes for screwing into the wall. Transparent plastic cover for screws and LED protection. Cable can exit from the back, into a hole in the wall. Or downside (or left/rightside) on the same wall side, through break-able edges. OEM Versions • 904.200.17 RFID 125KHz - 64 bit read-only tags (EM - H4102 compatible) four integrated selectable emulation interfaces: buffered magstripe-Clock&Data, Wiegand 26 bit, (Barcode C39), RS232 9600n8. No casing, only circuit versions available. • 904.201.14 ISO14443 A/B & ISO15693 reader, Mifare®. Magstripe output, serial TTL output, read & write - outdoor use CE and FCC. • 904.202.14 ISO14443 A/B & ISO15693 reader, Mifare®. Magstripe output (buffered), RS232, read & write, Wiegand (through command 232), Molex connector, 12 Vdc - outdoor use Power supply: +5..16Vdc 80mA (versions 904.200.17) • 904.205.15 LEGIC® + ISO 14443A+15693, magstripe and serial output at TTL level. • 904.206.15 LEGIC® + ISO 14443A+15693, buffered magstripe, RS232 interface. • RFID/2’s are general purpose readers and read/write modules that can be used for any AutoID applications. Certificates Electrical and physical characteristics +5Vdc 70mA (versions 904.201.14 and 904.205.15) +5..16Vdc 150mA (versions 904.202.14 904.206.15) Environmental: IP67 (904.200.17 IP65 only) Working range: -20°..+60° Size: mm 102 x 42 x 23 • In Wiegand and buffered versions Long-Distance connection can reach up to 100m. • In bidirectional connection RS232 (or TTL) allow complete handling of read/write, multisegmented applications and "Multi-applications". • Maximum Security applications can be implemented using LEGIC® advant technology with encrypted transmissions. RFID/2 readers are supported by all Zucchetti Axess terminals in readonly applications. Read/Write applications may require customized SW development. Zucchetti Axess S.p.A. Via della Filanda 22•40133 Bologna, Italy Tel. +39 051 3519311•Fax +39 051 3519399 Via Turati, 111•20023 Cerro Maggiore (MI), Italy Tel. +39 0331 423211•Fax +39 0331 423299 USA Tel. +1 978 688 6401 Email: contact@axesstmc.com www.zucchettiaxess.com zucchetti aXESS 904 RFID/2 zucchetti aXESS

Open the catalog to page 1