Field Devices INTERACTION WITH USERS AND THE ENVIRONMENT In Access Control, Time & Attendance and Security systems, the different environmental conditions of use and different functional requirements mean that adaptability and flexibility are key features of the respective devices for identification and interfacing with the environment. Zucchetti Axess meets these requirements with the modular, integrated solution of Field Devices. a brand of Zucchetti Axess S.p.A [email protected] www.axesstmc.com The job of the Field Devices is to enable the system to interact with the environment . In practice, they are the physical interfaces through which the system detects statuses, identifies users, and controls equipment. The Field Devices are a series of devices with a high degree of modularity, which enables them to be adapted to a wide range of requirements dictated by applications (access control only, access control + time & attendance, intrusion detection, etc.), the environment (indoor and outdoor installations, modern and historic buildings, etc.), identification technologies (magnetic cards, proximity cards, smart cards and biometric measurements) and detection technologies (volumetric sensors, perimeter sensors, etc.). Data bus and power supply connect the Filed Devices to the Field Processors, the powerful, innovative multi-application and multi-function field controllers by Zucchetti Axess. WIDE RANGE OF SUPPORTED TECHNOLOGIES The Field Device range includes: • Card readers • Card readers with display • Fingerprint readers • Keypads • Digital or analogue input/output interface modules • Standard interfaces for connecting third-party peripherals which can be physically and logically combined in any permutation to deliver the most appropriate solution to any requirement of Time & Attendance, Access Control or Intrusion Detection. Card readers are available for all the most commonly used identification technologies: • barcode, • magnetic strip, • EM4102® 125 KHz, • HID®, I-Class, • HID® 125KHz, • ISO 14443/A(Mifare®) and B, • ISO 15693, • Legic® The versions with display, each with 2 lines of 16 characters, normally show the system date and time. In the event of functional or technical anomalies, they display warning messages and, at the time of stamping, the respective date and time and the name of the card-holder. In bi-directional versions, the direction of transit, based on the side of the card that is introduced, can be configured by means of the application software XAtlas. ZUCCHETTI AXESS Field Devices ZUCCHETTI AXESS

Field Devices ZUCCHETTI AXESS FD-RA0x - Bi-directional magnetic card reader Reads track 2 on magnetic cards to ISO 7812. FD-R: Mono or bi-directional proximity card readers The readers are available either without a display (FD-Rx01) or with a 2-line backlit LCD with 16 characters per line (FD-Rx02). The following reading technologies are available: FD-RB0y: Mifare reader®: normally reads the unique serial number of the card (UID) or can be programmed to read the identification code of the user from a block of card memory. FD-RC0y: HID reader® 125 KHz: reads all standard format cards (Wiegand...