1. Catalogs
  2. Ave
  3. Sound Diffusion

Sound Diffusion

Sound Diffusion

Sound Diffusion

Product catalog summary
Overview: The document outlines the technical specifications and installation guidelines for a sound diffusion system, which includes components such as loudspeakers, volume controls, and interfaces for home automation integration.
System Management: The sound system can be managed through home automation touch screens, facilitating integration into various scenarios.
Volume Control: The system allows for volume adjustment in both mono and stereo zones. It supports amplifiers with power ranging from 30 to 80W at 4 Ohm or 30 to 40W at 8 Ohm. The input impedance can be set to 40 Ohm or 80 Ohm, influencing the maximum number of speakers per channel.
Loudspeakers: Various loudspeakers are detailed, including flush and wall-mounted options, with specifications such as 8 Ohm impedance and 5W RMS power. An LED indicates overload protection.
Installation Components: The document includes flush-mounted boxes, wall-mounted boxes, and frames compatible with different plate series, with specific models for various installation scenarios.
Interfaces and Adapters: Interfaces for connecting touch screens to multiroom sound systems are described, allowing control of sound sources and volume from touch screens. Adapters for local control modules are also mentioned.
Technical Specifications: Detailed tables provide information on amplifier output impedance, power, and the maximum number of loudspeakers per channel. Specific codes and series for components are listed for reference.
Specifications: The bipolar commutator for sound diffusion is designed to exclude main loudspeakers of the HI-FI system and activate the VS001 loudspeaker. It is part of the Banquise and Blanc series. The volume control (45340) cannot control two VS001 speakers simultaneously; it only regulates volume without switching the speaker on or off.
Installation Procedures:
  • Avoid placing speaker or amplifier wires with 230V ac power cables.
  • Use twisted, polarized, and colored cables (e.g., red and black) for each amplifier channel.
  • Install the regulator in a dedicated box, either wall-mounted or flush-mounted, avoiding installation with 230V devices.
  • Verify wiring visually and with a tester to ensure no short circuits or phase inversion.
  • Ensure correct polarity (+ and -) in connections to prevent damage to the amplifier.
  • Complete all connections and configurations of volume regulators before connecting to the stereo amplifier line.
Recommendations: AVE offers support for planning and budgeting special technological plants, technical/commercial information, pre and post-sales assistance, and on-site support.
Additional Information: For more details, visit www.ave.it or contact support at 800 015 072 or +39 030 24981.
See more

Catalog excerpts

Sound Diffusion-1

SOUND Diffusione Sonora Sound Diffusion

 Open the catalog to page 1
Sound Diffusion-2

Il sistema può essere gestito anche dai Touch screen domotici The system can be managed also by the touch screens of the home automation system Regolazione volume zone: è possibile regolare il volume sia di zone mono sia di zone stereo Volume control zones: You can adjust the volume of both mono and stereo zones

 Open the catalog to page 2
Sound Diffusion-3

possibilità di inserire la diffusione sonora all’interno degli scenari Scenarios possibility of including the sound system in the scenarios Altoparlante da incasso e da parete coordinato con le serie civili Flush and wall mounted loudspeaker matching the domestic series 44S33 Scatola da parete Wall mounted box BL02P Scatola da incasso Flush mounted box 44A33 Armatura standard S44 Standard S44 frame 44P933.. Placca di finitura con cornice da eliminare Plate. Frame to be removed 441AP01 Diffusore acustico Sound diffuser Cornice corretta fornita in dotazione con diffusore acustico Correct frame...

 Open the catalog to page 3
Sound Diffusion-4

Installation Examples ZONA STEREO - STEREO ZONE ZONA MONO - MONO ZONE ZONA MONO - MONO ZONE AMPLIFICATORE Amplifier Altoparlante generico 8 Ohm Generic loudspeaker 8 Ohm Il sistema consente la regolazione di zone stereo e mono e può essere utilizzato oltre che con gli altoparlanti Ave (442AP01 e 441AP01) anche con altoparlanti con impedenza 8 Ohm reperibili sul mercato. The system allows to control mono and stereo zones and can be used with the Ave loudspeakers (442AP01 and 441AP01) or with 8 Ohm impedance generic loudspeakers. • Il valore dell’impedenza di ingresso del regolatore può essere...

 Open the catalog to page 4
Sound Diffusion-5

SORGENTI SONORE (CD, TUNER, TAPE, MP3, ecc...) fino a 9 Sound sources (CD, TUNER, TAPE, MP3, etc...) up to 9 TS02 Centrali TUTONDO TUTONDO Central units Sistema stereo fino a max 6 punti di ascolto Stereo system up to 6 listening points a) Punto di ascolto 1 b) Punto di ascolto 2 1) Relè passo-passo cod. 45374 2) Pulsante illuminabile cod. 45305G+0220 3) Doppia presa punto linea cod. 45342-2 4) Commutatore bipolare cod. 45358 5) Variatore di volume cod. 45340 a) Listening point number 1 b) Listening point number 2 1) Step by step relay code 45374 2) lightable push buttons code 45305G +0220 3)...

 Open the catalog to page 5
Sound Diffusion-6

Loudspeaker to be used with 43A33 support and BL02P flush mounted box. 6 (3+3) - (S44) To be completed with plates of system 44. Wall mounted installation possible with 44S33 box (only with Vera44 plates) • Impedance: 8 ohm • Power: 5W rms • Overload protection with led indication • Supplied with 2 inner frames white RAL 9010. For use with plates 6(3+3) modules. One frame for Zama/Personal 44 (44P933.. - 44P033..) and one frame for Vera 44 plates (44PV33..- 44PA33.. -44PL33..). The interframe must be installed after removing the original one with the central crossbar Diffusore acustico. Come...

 Open the catalog to page 6
Sound Diffusion-7

Sistema Domina Domina System ABTTINT01 Interface for Tutondo sound diffusion systems. It connects ave touch screens (TS02) to Tutondo multiroom sound systems (MR9005 or MR6005). It enables the touch screens to work as keyboards through specific pages on the touch screens. It's possibe to send to the Tutondo units the controls available on the front of the unit itself • AVEBus input • RS232 output for Tutondo systems • Possibility to select from the touch screens for each of the 5 output zones the sound source among those available on the inputs (max 9) • Control of volume and tones • Enclosed...

 Open the catalog to page 7
Sound Diffusion-8

Suggerimenti per la realizzazione dell’impianto Some suggestions for the installation of the system • Non posare i cavi per gli altoparlanti o quelli provenienti dall’amplificatore con cavi di alimentazione elettrica 230Vca. • Usare fili a coppie twistate polarizzati e colorati (es. rosso e nero) per ogni canale dell’amplificatore. • Installare il regolatore in apposita scatola, a parete o incasso, evitando l’installazione promiscua con apparecchi a tensione di rete. • Verificare visivamente e con tester l’esatto cablaggio (attenzione a non invertire ingresso con uscita sul regolatore) e che...

 Open the catalog to page 8

Archived catalogs

  1. Life Touch

    12  Pages

  2. Allumia

    12  Pages

  3. Domus Touch

    8  Pages

  4. Ventilation

    42  Pages

  5. Sistema 45

    106  Pages

  6. Automfation

    76  Pages

  7. Safety Security

    44  Pages

  8. sistema 44

    254  Pages

  9. ElettroQ.

    8  Pages

  10. Avein4

    7  Pages

  11. AVE COLOURS

    12  Pages

  12. PE08

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.