double face technobond

Product catalog summary

Introduction
The document provides technical specifications for AV Composites' Technobond insulating panels, highlighting their industrial bonding technology, mechanical performance, and quality assurance. Technobond is designed for use in various climatic conditions due to its strong adhesive power.

Applications
Technobond panels are suitable for use on metallic (e.g., steel, aluminum) and organic supports (e.g., PE foam, PU), excluding PVC. They are used in sandwich panels, vertical fillings, and other structural applications.

Panel Constitution
The panels consist of extruded polystyrene foam with a thermal conductivity of 0.028 W/m.K, a rubber-based adhesive, and silicone paper. The adhesive is translucent amber with high tack properties.

Assembly Instructions
For optimal adhesion, surfaces must be clean, dry, and free of grease. Recommended solvents include isopropyl alcohol and heptane. Application pressure enhances contact and resistance. The ideal application temperature range is 15°C to 40°C.

Panel Thickness and Properties
Available thicknesses are 20.5 mm, 25 mm, and 30 mm. Thermal loss coefficients and resistances vary with thickness, with a softening point of approximately 110°C and a SAFR of 70°C. The panels have a peel strength of approximately 35 N/m² and a fire classification of M1.

Dimensions and Weight
The panels measure 1000 mm in width and 3000 mm in length, with weights ranging from 1.4 kg/m² to 1.7 kg/m² depending on thickness.

Guarantees and Recommendations
The product has a shelf life of 12 months when stored between 10°C and 35°C. AV Composites provides civil insurance but disclaims responsibility for misuse. Users are advised to conduct tests before use, as conditions and methods are beyond the company's control. Modifications to specifications may occur without notice.

Catalog excerpts

Technobond® Double-Face Panels The insulating panels from the Véranda rangeamme Véranda are made thanks to industrial bonding technology which allow a very good mechanical performance and which guarantee quality. The new product Technobond is composed of extruded polyester, covered with a Hot-Melt self-adhesive glue made from rubber. AV Composites’ Technibond can be used in every climatic condition (high or low-temperature), thanks to its strong adhesive power. Technibond is used for the realization of sandwich panels, for vertical filling with metallic facings, in order to realize transoms, spandrel, fillings of windows, service entrance, etc… Prize-winner of the 2010 INPI innovation trophies Prize-winner of the 2010 DELOITTE Technology Fast 50 AV Composites ZA de la Massane 11 Av. des Joncades Basses 13210 Saint Rémy de Provence Tél. :+(33) 4 32 61 92 95 Fax: +(33) 4 90 15 43 39 Web : www.avcomposites.com Mail : [email protected] Authorized distributor : Copyright AV Composites 10/2010 The AV Composites panels and their systems of junction are the object of numerous patents !

Open the catalog to page 1

Technobond® Double-Face Panel *** Specification sheet of the Technobond *** 1- Applications : Good behaviour on any type of support : - Metallic: Steel, Aluminium, ... - Organic : PE foam, PU,...except PVC support The application must be made on supports and materials with polished surfaces. 4- Thickness : 20,5 - 25 - 30 mm 3- Assembly : To obtain optimum adhesion, surfaces have to be clean, dry, free of grease and dust, and remove th grease marks with a solvent recommended like :isopropyl alcohol, Heptane. Never use white spirit or petrol. The application of pressure “taping by hand, rolls,...

Open the catalog to page 2

All AV Composites catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list