
The floor-standing bin features self-supporting, curved, powder-coated galvanized steel outer walls connected to stable flat side panels. It includes a curved door with a recessed lock, supplied with a key, and a door retention profile to prevent hinge overstretching. The curved cover is firmly attached, reducing height from two sides and providing rain protection without a storage area. A sturdy insertion ring guides waste into the inner liner.
The design minimizes the disposal of household refuse bags and includes snap locks to protect against unauthorized access.
Operate the embedded snap lock with a square key (1/4 turn) to open the door and access the inner liner for waste bag replacement. The snap lock allows the door to be closed and locked without a key. The information area content can be changed using an Allen wrench to loosen the frame screws.
The powder-coated galvanized steel surface is easy to clean and maintain with commercial care products for powder-coated materials.
CAPITAL Floor standing bin with information area 71511 Volume Compartments Casing material Casing material thickness Inner liner material Information area Width Depth Height 65 Liter 1 galvanized steel powder-coated 1,5 - 2,0 mm 2,00 mm (cover) galvanized steel polyethylene sheet (1 mm) transparent, DIN A2 520 mm 400 mm 960 mm Accessoires / Options see FEATURES AUWEKO GmbH • DornhofstraOe 34 • 63263 Neu-Isenburg Telefon: +49 6103 804955-0 • Fax: +49 6103 804955-10 • Email: [email protected] • Website: www.auweko.de Copyright declaration: All sketches, drawings and electronic information are the property of AUWEKO GmbH in Neu-Isenburg. The use of these documents, hard copies or information is permitted for internal purposes only. Forwarding to third parties is not authorised. Subject to technical alteration. © AUWEKO GmbH, 63263 Neu-Isenburg
Open the catalog to page 1Datasheet 03.011 / Technical Information 05.2020 Floor standing bin with information area 71511 Description: Self-supporting, curved, powder-coated galvanized steel outer walls, connected to stable flat side panels. Curved door with recessed lock (a key is supplied with each container). The door retention profile prevents the hinges from overstretching. A curved cover is firmly connected to the structure. The shape of the cover results in reduced height from two sides. A sturdy insertion ring guides waste into the inner liner. Safety: The curved cover serves as rain protection without providing...
Open the catalog to page 22 Pages
2 Pages
2 Pages
2 Pages
3 Pages
32 Pages
2 Pages
2 Pages
2 Pages
2 Pages
4 Pages