TollPlus 261 Motorway Car park Industry-Tertiary Hospital/Clinic Residential/sme-smi Controlled access Trafc Management Bridge/Tunnel The reference for the highway environment High speed performance from 0.6 s in continuous service Congestion Control 50 vehicles per minute Modular up to 4.00 meters Wide range of options and accessories Simple to install Reduced maintenance Designer and manufacturer of boundary access control equipment www.automatic-systems.com Fiche Toll Plus 261 EN.indd 1

Designed for highway toll booths, the TollPlus 261 barrier meets numerous requirements in terms of performance, reliability and robustness, adaptability and reduced maintenance. Its lack of obstructions and easy access to the mechanism with the equipment located on the opposite side to the trafc allows maintenance operations to be carried out in complete safety. Standard characteristics of the TollPlus 261 SR/AVR rising barrier 1 • Variable speed control supplied with 230 Volts single-phase ensures control of the accelerations, decelerations, short circuit protection, grounding, overcurrent and...

Aluminum boom 80 X 54 mm Swing-off device Us Aluminum boom 80 X 54 mm Swing-off device With polystyrene protection Ø 140 mm and high-resistance cover "Protecta" carbon boom Swing-off device With polystyrene protection Ø 100 mm and high-resistance cover Visual alarm with ashing lights Audible siren alarm "Protecta" carbon boom Swing-off / automatic reseating With polystyrene protection Ø 100 mm and high-resistance cover Fiche Toll Plus 261 EN.indd 3

Barrier installation Useful boom length 1 conduit ø 40 for power cables 2 conduit ø 40 for control cables 3 conduit ø 20 for loop cable 2 Concrete base level 600 x 600 x 600 The chassis enclosure is secured with 4 screws and 4 washers. It is possible to x the barrier with M12 chemical anchors 4 welded iron plates Horizontal concrete base Housing plate Arm on left Direction of traffic 300 Your installer: Fiche Toll Plus 261 EN.indd 4