TollPlus 160 DESCRIPTION 1. Aluminium cast sole plate. 2. Anodized aluminium frame. 3. Laquered aluminium housing panels (selection of 4 colors). «Qualicoat» laquering providing an excellent protection against corrosion. 4. Aluminium cast hood, locked by key. 5. Oval aluminium arm of section 80 x 54 mm, laquered white (RAL 9010) with red reflective strips. 6. Drive shaft, diameter 30 mm, fitted on a geared motor and a lifetime lubricated bearing. 7. Automatic opening in case of power failure (AVR). 8. Electromechanical assembly including : • Reversible three-phase asynchronous gear motor, maintaining the arm in its 2 extreme positions (open and closed), is achieved by the frequency converter. • Frequency converter ensuring progressive The TollPlus 160 barriers are rising barriers for toll applications, for manual toll collection (MTC version) with moderate traffic flowbut also for the lane closing (LC version). Solution 4 Porte / Door Swing-off device to the back accelerations and dampened decelerations, for movement without vibrations, reversal of direction without jolts (reopening) and increased protection of the mechanism. Electronic restriction of the electromechanical assembly torque allowing immediate stopping of the boom during closing, if an obstacle is detected. • Analog position sensor indicating the high and low positions and allowing control of the gear motor. • Balancing of the arm by means of a compensating spring, according to the weight of the arm. 9. Varnished electronic control board offering inputs, outputs and relays adjustable: • Adjustable opening and closing speed. Arm position status (open or closed) Technical fault information report. Human/Machine interface by dipswitches, potentiometers, push button and leds. HTML interface via Ethernet connector. Socket for presence detector (2 loops). MODBUS communication. Swing-off device to the front Technical datasheet TollPlus 160-FT-EN-02 With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the inform

Technical datasheet TollPlus 160-FT-EN-02 STANDARD TECHNICAL SPECIFICATIONS Electrical power supply During motion: 150W max. At rest: 44W Note: not to be connected to an isolated ground network or a high impedance earthed industrial network Opening time Operating temperature Relative humidity Mean cycles between failures - 5.000.000, when respecting recommended maintenance (Allowing the passage of 1500 véhicules/h) Conforms to European standards. STANDARD RAL COLORS Note: These RAL references are available for free. RAL 3020 RAL 7016 (*) RAL 9010 Traffic red Anthracite grey Traffic white (*)...