Catalogs >
AUTOMATIC SYSTEMS >
ClearLock 636

ClearLock 636
3Pages

Catalog excerpts

ClearLock 636 Datasheet Rev. 07 • Update 02/2022 jTJ AUTOMATIC SSI SYSTEMS & ClearLock' DESCRIPTION 1. Painted steel upper casing containing the drive mechanism and the control board unit of the security booth. 2. Two mobile obstacles in laminated glass BR2S P6B. Each door panel is equipped with a protection ensuring the safety of users. 3. Two lateral panels made of painted steel and laminated clear glass BR2S P6B. 4. Metal floor of 25 mm thick for installation on a finished floor. 5. Control board unit & motorisation comprising: • Programmable electronic board; • I/O interface board for access control system; • Remote console for operating mode adjustment; • Voice messages device; • Two back-up batteries ensuring 100 cycles in case of power failure; • Electro-mechanical lock of the obstacles (with programmable unlocking in case of power failure); • Safety cells for reopening in case a presence is detected in front of the obstacles (anti-pinch safety). 6. Spotlights for the passageway lighting. 7. Function pictograms: red and green LED displays indicating the status of the security booth. And also push button, intercom and/or access badge reader, according to the need. 10. Lock for external door locking. The ClearLock 63x series, automatic round security booths are designed to provide high security access control. The ClearLock 636 security booth is equipped with two mobile obstacles which provide a free passage of 650 mm and an external diameter of 1.152 mm. The ClearLock 636 is motorised and bi-directional. It is answering to the market demand in term of unicity of detection, bullet resistance and burglary or vandalism resistance. The Clearlock 636 is available with straight (180°) or left/right angled (90°) passage. Consisting of a frame, a painted steel housing and glass panels, the high-security ClearLock series booths provide thermal insulation and stand out in their surroundings.

Open the catalog to page 1

CONFIGURATIONS 1. RAL7035 Light Grey (by default] - RAL9011 Black - RAL9010 White - 2. Profile position for wall connection: - entry / outside side. - middle position (by default]. - exit / inside. 3. In the event of a power failure: - All doors can be opened manually - Exit door (secured side] remains locked Entry door (non-secured side] can be open manually - all doors remain locked 4. Integration of card reader, intercom and/or push button at the entry and/or exit of the booth. 5. Choice of the language of voice message and control consol. All the mechanical parts are treated against...

Open the catalog to page 2

650 1152 Headquarters Avenue Mercator, 5 1300 Wavre - Belgium helpdesk.as@automatic-systems.com ^ +32.(0)10.23.02.11 @ www.automatic-systems.com CL 636-FT-EN-07 With a constant view of adopting the latest technological developments, Automatic Systems reserves the right to amend the information above, at any time. Non-contractual document.

Open the catalog to page 3