- Catalogs
- Aurubis Finland Oy
- Nordic Standard
Nordic Standard
1 / 2 PagesView full catalog
Nordic Standard
Product catalog summary
Specifications:
Phosphorous deoxidised copper (DHP-Copper) is specified with a width range up to 1100 mm, thickness range from 0.4 to 1.5 mm, coil weight up to 4000 kg, and sheet length up to 6000 mm.
Phosphorous deoxidised copper (DHP-Copper) is specified with a width range up to 1100 mm, thickness range from 0.4 to 1.5 mm, coil weight up to 4000 kg, and sheet length up to 6000 mm.
Fabrication Properties:
The material exhibits excellent formability, soldering, and brazing capabilities. TIG and MIG welding are rated as good, while EBW is poor. It is crucial to remove the oxide layer before welding, soldering, and brazing.
The material exhibits excellent formability, soldering, and brazing capabilities. TIG and MIG welding are rated as good, while EBW is poor. It is crucial to remove the oxide layer before welding, soldering, and brazing.
Chemical Composition:
Copper (Cu) content is a minimum of 99.90%, and Phosphorus (P) ranges from 0.015 to 0.040%.
Copper (Cu) content is a minimum of 99.90%, and Phosphorus (P) ranges from 0.015 to 0.040%.
Physical Properties:
Density is 8.94 kg/dm3. Thermal expansion is 17*10-6 1/K, specific heat is 385 J/kg K, and thermal conductivity is 335 %W/Cm.
Density is 8.94 kg/dm3. Thermal expansion is 17*10-6 1/K, specific heat is 385 J/kg K, and thermal conductivity is 335 %W/Cm.
Typical Use:
Commonly used in architecture for roofing, facades, window and door frames, and decoration.
Commonly used in architecture for roofing, facades, window and door frames, and decoration.
Material Designation:
Cu-DHP, CuZn0.5, CW024A, CW119C, R220, H040, R240, H065, R290, H090, CuSn0.15 CW117C, R250, H060, R300, H085, CuAl5Zn5Sn1 CW309G R400, H080, CuSn4 CW450K R290, H070, CuZn15 CW502L R310, H090.
Cu-DHP, CuZn0.5, CW024A, CW119C, R220, H040, R240, H065, R290, H090, CuSn0.15 CW117C, R250, H060, R300, H085, CuAl5Zn5Sn1 CW309G R400, H080, CuSn4 CW450K R290, H070, CuZn15 CW502L R310, H090.
Mechanical Properties:
The material meets the requirements of standard EN 1172. Tensile strength ranges from 220 to 400 N/mm2, 0.2% proof strength ranges from 140 to 290 N/mm2, hardness ranges from 40 to 115 HV, and elongation ranges from 4% to 45%.
The material meets the requirements of standard EN 1172. Tensile strength ranges from 220 to 400 N/mm2, 0.2% proof strength ranges from 140 to 290 N/mm2, hardness ranges from 40 to 115 HV, and elongation ranges from 4% to 45%.
See more
Catalog excerpts
Specification Nordic Standard Phosphorous deoxidised copper (DHP-Copper) CW024A Typical use Architecture, eg. roofing, facades, window and door frames, decoration. Nordic Standard Chemical Composition %: Dimension: Width range Thickness range Sheet length Fabrication properties: Formability Physical properties: Density Thermal expansion Specific heat Thermal conductivity 335 %W/Cm Oxide layer must be removed before the welding, soldering and brazing.
Open the catalog to page 1
Mechanical properties: The material fulfils the requirements of standrad EN 1172. Tensile strength Material number Material condition
Open the catalog to page 2All Aurubis Finland Oy catalogs and technical brochures
Nordic Bronze2 Pages
Nordic Blue2 Pages
Nordic Royal2 Pages
Nordic Royal - copper alloy2 Pages
Aurubis Copper Architecture28 Pages
Related Searches
- Profiled sheet
- Facade profiled sheet
- Facade cladding profiled sheet
- Aluminum profiled sheet
- Decorative profiled sheet
- Perforated profiled sheet
- Roof sheet metal
- Patterned sheet metal
- Sheet sheet metal
- Special sheet metal
- Interior profiled sheet
- Wall-mounted metal sheet
- 3D sheet metal
- Colored sheet metal
- Copper sheet metal
- Ceiling sheet metal
- Sheet metal with round perforations
- Brown sheet metal
- Polished sheet metal
- Coil sheet metal
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.