LLUMINATED SMT TACT SWITCH WITH LED

Product catalog summary

Overview: The document provides technical specifications and assembly instructions for the ME/MH-655PCB.2M illuminated SMT tact switch with LED, crafted by Atelier Luxus.

Specifications:

All buttons feature a central white LED, available in warm or cold white, with a voltage range of 5-24VDC.
Electrical parameters include a maximum voltage of 32 VDC, minimum voltage of 20 mV, and current range from 1 mA to 50 mA.
Dielectric strength is ≥ 250 Vrms, with contact resistance < 100mΩ and insulation resistance > 109Ω.
Switch function is momentary action with a SPST, N.O. contact arrangement.

Board Schematic:

The PCB circuit supports 3 to 6 push buttons with potential-free contacts.
Compatibility with KNX modules requires verification from Atelier Luxus.
Optional temperature sensors (NTC, PT100, PT1000) can be integrated.

Electrical Parameters:

Nominal current is 6 A with various rated voltages and surge voltages specified.
Connection method is pluggable with specific conductor cross-section requirements.
Push-in spring connection is used, with detailed instructions for conductor insertion and removal.

Assembly Instructions:

Components include PCB module, spacer, support, screws, buttons bracket, and faceplate.
Faceplate dimensions are specified as 30mm x 27mm.

Additional Information:

For detailed technical information, refer to the Phoenix Contact website.

Catalog excerpts

ILLUMINATED SMT TACT SWITCH WITH LED MECHANISM ELECTRICAL SPECIFICATION ILLUMINATED SMT TACT SWITCH WITH LED PCB circuit from 3 to 6 push buttons (potential free contacts). Max Volt. 32V BUTTON LIGHTING OPTION SWITCHES AND LEDS POSITIONS All buttons have a white LED in the centre. The button will be illuminated through a hole in the centre of the button (Fig.1). Crafting bespoke switches since 1995

Open the catalog to page 1

ILLUMINATED SMT TACT SWITCH WITH LED BOARD SCHEMATIC Optional temperature sensor Polarity doesn't matter LED 1 LED 2-3 Polarity doesn't matter ATELIER LUXUS PCB LED DRIVER ATELIER LUXUS PCB LED DRIVER ATELIER LUXUS PCB LED DRIVER ATELIER LUXUS PCB LED DRIVER ATELIER LUXUS PCB LED DRIVER ATELIER LUXUS PCB LED DRIVER ATELIER LUXUS PCB LED DRIVER ATELIER LUXUS PCB LED DRIVER ATELIER LUXUS PCB LED DRIVER TEMPERATURE SENSOR (OPTIONAL) Temperature sensor can be fitted. SENSOR REFERENCE : (ONE AT A TIME) NTC : VISCHAY NTCS0805E3103JLT PT100 : YAGEO Nexensos 32208550 PT1000 : YAGEO Nexensos 32208571...

Open the catalog to page 2

ILLUMINATED SMT TACT SWITCH WITH LEDCONNECTOR INFORMATION Phoenix Contact: PTSM 0,5/ 7-2,5-V SMD WH R44 - 1814757 Push-in connection: Solid conductor or flexible conductor with ferrule can be push in connector without tools. Connection out: a small flat screwdriver have to been use to get conductor out of connector. Insert tool inside connector to release spring and pull out conductor. Please find all technical details on Phoenix Contact website: https://www.phoenixcontact.com/pi/products/1814757 Crafting bespoke switches since 1995

Open the catalog to page 3

ILLUMINATED SMT TACT SWITCH WITH LED FACEPLATE LAYOUT Crafting bespoke switches since 1995

Open the catalog to page 4

ILLUMINATED SMT TACT SWITCH WITH LED ASSEMBLY DIAGRAM EDGES MECHANISM PCB module Support Screws Buttons bracket Buttons Faceplate Edges HERITAGE MECHANISM Screws Buttons bracket Buttons Faceplate Heritage Crafting bespoke switches since 1995

Open the catalog to page 5

All Atelier Luxus catalogs and technical brochures

Archived catalogs

ATELIER LUXUS - DoT- EN - 2025
9 Pages