LSU08 SYNCHRONIZATION UNIT Operating Instructions LIGHTING

PREFACE PRECAUTIONS The LSU08 is a special unit designed to use with multi-color LED lights. The 8 outputs enable color synchronization of different underwater and interior & exterior LED lights Meteor, Intensa and Arcus series when automatic changing of the color of lighting through the complete rainbow spectrum is selected. FEATURES 2 Synchronization Outputs for Arcus series 6 Synchronization Outputs for Intensa and Meteor series Wide Range Power Supply Low Power Consumption Polarity Protection Transient Protection Short Circuit Output Protection Simple Installation 3 The synchronization unit...

CONTROLS AND CONNECTORS Synchronization Unit LSU08 6 K9 K10 K7 S K4 K3 S CH - 8 K6 CH - 4 S CH - 7 S CH - 6 K5 K2 7 S CH - 5 8 9 5 K1 S CH - 1 S CH - 2 S CH - 3 DC IN 1 2 3 4 (1) CH-1 The synchronization output to connect the Control and +DC wires of Arcus series. (2) CH-2 The synchronization output to connect the +Control and GND Control wires of Intensa/Meteor series. (3) CH-3 The synchronization output to connect the +Control and GND Control wires of Intensa/Meteor series. (4) DC IN Terminal-block connector to connect 12-24Vdc power supply. (5) CH-4 The synchronization output to connect the...

INSTALLATION The synchronization unit kit consists of the following components: Synchronization Unit LSU08 5 x cable gland M12 Operating Instructions with Declaration of Conformity and Warranty conditions The LSU08 has to be installed on suitable location. Avoid the installation in extremely hot places and near appliances generating strong magnetic fields. The installation have to be realized by a qualified personnel. Note: The main DC power supply has to be switched off before installation. Power supply connection The power supply has to be connected through the switch (not included) and protected...

55,5 APPEARANCE 21 40 40 21 35 30 30 30 TECHNICAL SPECIFICATIONS Input voltage Consumption Operating temperature Casing Protection Dimensions Weight 12-24 Vdc max. 10 mAdc -10C - +50C ABS IP 65 max. 181x122x55.5mm 0.3 kg Design and specifications subject to change without notice. 6 35 21

WARRANTY 1. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferrable and covers the product for the specified time period. 4. In case any part od the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written statement...

DECLARATION OF CONFORMITY according to IEC Guide 22 and EN 45014 Manufacturer's Name: ASTEL, Podjetje za projektiranje, proizvodnjo in trgovino, d.o.o. Manufacturer's Address: Dutovlje 138 6221 Dutovlje Slovenija declares that the products Item, Product Name and Model Number: 1. Synchronization Unit LSU08 conform to the following Product Specifications: EMC: EN 55022 (CISPR 22: 1993) EN 50130-4: 1994 Safety: EN 60950 EN 60529 Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CEmarking accordingly: - the EMC Directive 89/336/EEC...