*myarchiexpo

Catalogs
ASTEL LIGHTING
Surface Mount Niche LSMN

Surface Mount Niche LSMN

Product catalog summary

Preface
The Surface Mount Niche (LSMN) series is designed for installing METEOR series underwater lights on pool walls. The niche is constructed from stainless steel, ensuring a waterproof and aesthetically pleasing installation.

Features

Compatible with METEOR series lights
Stainless steel body and screws
Simple installation process

Components

Screws: Stainless steel screws for securing the underwater light.
O-ring: Ensures waterproof sealing.
Stainless Steel Body: Contains fixing holes and a sealing groove.
Underwater Light: METEOR series lights.
Wall-Plugs: For securing the stainless steel body.

Installation Instructions
The LSMN kit includes a stainless steel body, four M6 x 12 fixing screws, an O-ring, and installation instructions. The niche must be fixed on a flat pool wall surface below the waterline. Use sealant around the screws and on the niche's rear surface. A two-component polymer sealant is recommended. The METEOR lights are secured to the niche with four screws, and the O-ring must be properly inserted for sealing. Installation should be performed by qualified personnel. Avoid overtightening screws to prevent damage.

Technical Specifications

Material: Stainless steel (SAE316L)
Dimensions: Ø99 x 10 mm (LSMN 0640), Ø119 x 10 mm (LSMN 1280), Ø139 x 10 mm (LSMN 36240)
Weight: 0.5 kg (LSMN 0640), 0.7 kg (LSMN 1280), 0.9 kg (LSMN 36240)

Note: Design and specifications are subject to change without notice.

Contact Information
ASTEL d.o.o., Dutovlje 138, 6221 Dutovlje, Slovenia
Tel: +386 5 7310771, +386 5 7310772
Fax: +386 5 7310789
Email: [email protected]
Web: www.astel-lighting.com

Catalog excerpts

LSMN SURFACE MOUNT NICHE 0640 1280 36240 Installation Instructions LIGHTING

Open the catalog to page 1

PREFACE FEATURES The Surface Mount Niche LSMN series is designed to install the METEOR series of underwater lights on the pool wall. The LSMN body is made of stainless steel. The O-ring and stainless steel screws enable reliable waterproof and esthetical installation. For using with METEOR series Stainless Steel body Stainless Steel Screws Simple Installation COMPONENTS 3 2 1 4 5 6 (1) SCREWS Stainless steel screws for underwater light fixing. (2) O-RING O-ring. (3) STAINLESS STEEL BODY Stainless steel body with fixing holes and sealing groove. (4) UNDERWATER LIGHT The METEOR series of underwater...

Open the catalog to page 2

INSTALLATION The LSMN kit consists of the following components: Stainless steel body 4 x fixing screw M6 X 12 O-ring Installation instructions Fixing and sealing The LSMN niche has to be fixed on a flat surface of the pool wall under water line. The sealant has to be used around the four fixing screws and on the rear surface of the LSMN niche. The sealant can be on silicon basis but the best solution is two-component polymer sealant. The METEOR series of underwater lights has to be fixed to the LSMN niche with 4 screws. The sealing is enabled by the help of O-ring which have to be inserted properly....

Open the catalog to page 3

All ASTEL LIGHTING catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list