Catalogs >
ASTEL LIGHTING >
SOMBRA_00XX manual

SOMBRA_00XX manual
12Pages

Catalog excerpts

Operating Instructions

PRECAUTIONS The SOMBRA 01XX-02XX-03XX-06XX series of outdoor light with built-in driver is designed to use the latest LED lighting technology. The modular designed casing enables the selection of different colors of lighting, heights and beams for flush-mount or surface-mount wall installations. The SOMBRA 01XX-02XX-03XX-06XX series is available in stainless-steel or sand-blasted and anodized aluminium casings with E6C0 finishing. The lighting is available in warm white, daylight white, cool white, red, green, blue, RGB or RGBW colors with 1, 2, 3 or 6 high-power LEDs. The most advanced...

Open the catalog to page 3

(1) Engine Stainless steel or sand-blasted anodized aluminium, with different lighting colors and beam options.

Open the catalog to page 4

(2) Tube Sand-blasted anodized aluminium, with diameter of 60 mm of different heights for surface-mount light installation.

Open the catalog to page 5

The installation have to be realized by qualified personnel. Note: • Do not overtighten the screws and threads as this can result in wail light damage. Note: • Do not cover the wall light body with any kind of temperature isolating material. The wall light is protected by a temperature sensor against over-heating. When the temperature of the wall light exceeds 85°C the wall light is automatically switched off. The power supply has to be connected through the main switch (not included) with correct polarity and protected by a fuse (not included). The power supply voltage range has to be from...

Open the catalog to page 6

Single-color warm white (WW), daylight white (DW), cool white (CW), red (R), green (G) or blue (B) models: Control by momentary switch Remote control by momentary switch can be used to turn-on and turn-off the light and to control the luminosity. Turning on / off Press the momentary switch momentary. Dimming When the light is on, press the momentary switch longer until the desired power is achieved. Turning on minimum When the light is off, press the momentary switch longer (e.g. one second or more) until the light is turned on at minimum power. Set default Press the momentary switch for...

Open the catalog to page 7

Setting the Custom Color At the selected Rainbow Color Spectrum mode press the momentary switch shortly to turn the light off. After that press the momentary switch for 5 seconds or until the light is switched to the selected color and then the Custom Color is set and selected. Dimming When the light is turned-on press the momentary switch until the desired illumination is achieved. By another pressing of the momentary switch the luminosity will increase to the maximum illumination. Set default Press the momentary switch for min. 40 seconds or until the light is turned off. DMX512 control...

Open the catalog to page 8

Dimming When the light is turned-on press the momentary switch until the desired illumination is achieved. By another pressing of the momentary switch the luminosity will increase to the maximum illumination. Set default Press the momentary switch for min. 40 seconds or until the light is turned off. DMX512 control The built-in ASTEL protocol enables the network connection to control the lights with the standard DMX512 protocol by using optional LXU01 or LXU03 interfaces. Power supply Lens angle Optical window Luminous flux ASTEL protocol default address Operating temperature Casing...

Open the catalog to page 9

DECLARATION OF CONFORMITY according to IEC Guide 22 and EN 45014 Manufacturer's Name: ASTEL, Podjetje za projektiranje, proizvodnjo in trgovino, d.o.o. Manufacturer's Address: Dutovlje 138 6221 Dutovlje Slovenija declares that the products Item, Product Name and Model Number: 1. Wall LED light SOMBRA 01XX-02XX-03XX-06XX series conform to the following Product Specifications: EMC: Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CEmarking accordingly: -the Low Voltage Directive 2014/35/EU -the EMC Directive 2014/30/EU...

Open the catalog to page 10

WARRANTY 1. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferrable and covers the product for the specified time period. 4. In case any part od the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written...

Open the catalog to page 11