*myarchiexpo

LRMN Niche

Product catalog summary

Introduction
The Surface Mount Right-Angle Niche (LRMN) series is designed for installing the METEOR series of underwater lights on pool walls. Key features include a stainless steel body and screws, and a PVDF cable gland for simple installation.

Components

Screws: Stainless steel screws for fixing the underwater light.
O-Ring: Ensures waterproof sealing.
Stainless Steel Body: Contains fixing holes and a sealing groove.
Underwater Light: Compatible with the METEOR series.
Wall-Plug: For fixing the stainless steel body, included in the underwater light kit.
Cable Gland: PVDF material for cable insertion.

Installation Instructions
The LRMN kit includes a stainless steel body, four M6 x 12 fixing screws, an O-ring, and installation instructions. The niche must be fixed on a flat pool wall surface below the waterline. Use sealant around the screws and rear surface, preferably a two-component polymer sealant. The METEOR lights are secured with four screws, and proper O-ring insertion is crucial for sealing. Installation should be performed by qualified personnel. Avoid overtightening screws to prevent damage.

Technical Specifications

Material: Stainless steel (SAE316L)
Dimensions: Vary by model (e.g., Ø99 x 25 mm for LRMN 0640)
Weight: Varies by model (e.g., 1.3 kg for LRMN 0640)

Contact Information
ASTEL d.o.o., Dutovlje 138, 6221 Dutovlje, Slovenia. Tel: +386 5 7310771, Fax: +386 5 7310789, Email: [email protected], Web: www.astel-lighting.com

Note: Design and specifications are subject to change without notice.

Catalog excerpts

SURFACE MOUNT RIGHT-ANGLE NICHE 0640 1280 36240 36500 Installation Instructions

Open the catalog to page 1

The Surface Mount Right-Angle Niche LRMN series is designed to install the METEOR series of underwater lights on the pool wall. The connection cable is inserted through the cable gland. The LRMN body is made of stainless steel. The O-ring and stainless steel screws enable reliable waterproof and esthetical installation. For using with METEOR series Stainless Steel body Stainless Steel Screws PVDF Cable Gland Simple Installation (1) SCREWS Stainless steel screws for underwater light fixing. (2) O-RING O-ring. (3) STAINLESS STEEL BODY Stainless steel body with fixing holes and sealing groove. (4)...

Open the catalog to page 2

INSTALLATION The LRMN kit consists of the following components:  Stainless steel body  4 x fixing screw M6 X 12  O-ring  Installation instructions Fixing and sealing The LRMN niche has to be fixed on a flat surface of the pool wall under water line. The sealant has to be used around the four fixing screws and on the rear surface of the LRMN niche. The sealant can be on silicon basis but the best solution is two-component polymer sealant. The METEOR series of underwater lights has to be fixed to the LRMN niche with 4 screws. The sealing is enabled by the help of O-ring which have to be inserted...

Open the catalog to page 3

Design and specifications subject to change without notice.

Open the catalog to page 4

All ASTEL LIGHTING catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list