INTENSA LRM0115 LRM0320 LRM0620 INTERIOR & EXTERIOR LED LIGHT Operating Instructions LIGHTING

The INTENSA series of compact LED lights with electronic driver built-in waterproof anodized aluminium casing is designed by using 1, 3 or 6 high-power LEDs with built-in microprocessor which enables network connections and remote control with digital dimming. Advanced optical systems with reflector or high-efficiency lens and holographic diffuser allows perfect light spread with different color temperature options for The multi-color RGBW models offer the best illumination quality of different white lighting white and all other colors of lighting manually or automatically through the complete...

COMPONENTS AND CONNECTORS 5 5 3 2 3 4 2 4 1 1 (1) Optical window High-Grade Polycarbonate Glass Optical Window with Holographic Diffuser. (2) Face shape Massive face shape made of aluminium or stainless steel. (3) Interior & exterior light casing Aluminium casing. (4) Holding springs Holding springs (2x) to fix the interior & exterior light on the flat surface. (5) Cable The 2-pole or 3-pole multi-core cable to connect the 12-24Vdc power supply and control. 4

INSTALLATION The interior & exterior light kit consists of the following components: Interior & Exterior Light INTENSA series Operating Instructions with Declaration of Conformity and Warranty conditions The INTENSA has to be installed on a flat surface of ceiling or wall. The installation has to be realized by a qualified personnel. FLAT SURFACE INTENSA Surface preparation The interior & exterior light is recommended to be installed on the location to allow the best illumination and lighting effects. The diameter of the hole drilled through the board to insert and to fix the interior & exterior...

The power supply has to be connected through the switch (not included) with correct polarity and protected by a fuse (not included). The power supply voltage range has to be from 10 - 30Vdc. The interior & exterior light has to be connected as described in the table below: The interior & exterior light has to be connected as described in the table below: The control of the unit has to be connected through the momentary switch (not included) to the GND by using a 2-pole signal cable extension, (not included) When two or more interior & exterior lights are connected the control wires (red) can...

CONTROLS INTERNAL DIMMING Single-color models LRM0115 and LRM0320 with internal (I) dimming control: The dimming of interior & exterior light can be controlled by using the on/off switch. (not included) Turning on Press the switch to on position. Turning off Press the switch to off position. Dimming Follow the procedure to set the dimmer: (1) Turn the light on (2) Turn the light off-on quick and wait until light lights at full power (3) Turn the light off-on quick and wait until light lights at full power (4) Turn the light off-on quick and wait until light lights at desired power (5) Turn the...

Multi-color model MSR0620 with external (E) control: The multi-color RGBW interior & exterior light can be controlled by using the additional momentary switch. (not included). When the light is turned-off the color or mode of lighting can be changed sequentially by pressing the momentary switch for 2 seconds: INTENSA LRM0620 Sequence of lighting Custom Color Full RGB Cool White Bluish White Red Green Blue White Color Spectrum Custom White Color Rainbow Color Spectrum Turning on /off Press the momentary switch shortly. Changing the color or mode of lighting When the light is turned-off press the...

TECHNICAL SPECIFICATIONS INTENSA LRM0115 Power supply Reflector angle Optical window Luminous flux White color temperature Casing Dimensions Mounting hole Weight INTENSA LRM0320 Power supply Lens angle Optical window Luminous flux White color temperature Casing Dimensions Mounting hole Weight INTENSA LRM0620 Power supply Reflector angle Optical window Luminous flux White color temperature Casing Dimensions Mounting hole Weight 12 – 24 Vdc, max. 300 mA/12 Vdc or 155 mA/24 Vdc 130º High-grade polycarbonate glass 270 lm 4500K (daylight) or 3000K (warm) Black anodized aluminium Ф79mm x 26mm (C) or...

1. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferable and covers the product for the specified time period. 4. In case any part od the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written statement of the...

ASTEL, Podjetje za projektiranje, proizvodnjo in declares that the products 1. Interior & Exterior light INTENSA series conform to the following Product Specifications: Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CE- marking accordingly: