CASCADA LPR36240 UNDERWATER FOUNTAIN LIGHT Operating Instructions
Open the catalog to page 1PRECAUTIONS The CASCADA series of modular underwater/outdoor fountain light with built-in driver is designed to use the latest LED lighting technology. The modular designed casing enables the selection of different mounting options and cable installations. The CASCADA series is available in stainless steel casings with high-grade polycarbonate glass. The lighting is available in RGB color with 36 high-power LEDs. The most advanced engine with built-in microprocessor enables network connection and simple control of complete groups of multicolor lights through the complete rainbow spectrum by using...
Open the catalog to page 3(1) Fountain light LED light CASCADA series built-in polished stainless-steel casing with multicolor RGB lighting and different cable installations. The modular fountain LED light CASCADA series can be used as stand-alone unit or combined with the following assemblies. • Flood-light mounting assembly • Surface-light mounting assembly • Outdoor light mounting assembly
Open the catalog to page 4The assembling and installation have to be realized by qualified personnel. The CASCADA has to be assembled and fixed as shown in the drawings below: Note: Do not cover the FOUNTAIN light body with any kind of temperature isolating material. The FOUNTAIN light is protected by a temperature sensor against over-heating. When the temperature of the FOUNTAIN light exceeds 85°C the FOUNTAIN light is automatically switched off. 5
Open the catalog to page 5The power supply has to be connected through the main switch (not included) with correct polarity and protected by a fuse (not included). The power supply voltage has to be from 10 - 30Vdc. Note: • The power supply has to be switched off before installation. The underwater light has to be connected as described in the table below: For basic control of the light the CONTROL wire has to be connected through the momentary switch (not included) to the GND by using a 2-pole signal cable extension. (not included) For DMX512 control optional LXU01 or LXU03 interface can be connected to the CONTROL and GND...
Open the catalog to page 6CONTROLS Control by momentary switch Remote control by momentary switch has to be used to turn-on and turn-off the light and to control the mode of lighting and luminosity. When the light is turned-off the color or mode of lighting can be changed sequentially by pressing the momentary switch for 2 seconds: CASCADA LPR36240 Sequence of lighting Custom Color Full RGB Cool White Bluish White Red Green Blue Rainbow Color Spectrum Turning on /off Press the momentary switch shortly. Changing the color or mode of lighting When the light is turned-off press the momentary switch for 2 seconds. Setting...
Open the catalog to page 7TECHNICAL SPECIFICATIONS Power supply Lens angle Optical window Luminous flux ASTEL protocol default address Operating temperature Casing Protection Dimensions Weight Design and specifications subject to change without notice. 8
Open the catalog to page 8WARRANTY 1. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferrable and covers the product for the specified time period. 4. In case any part od the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written statement...
Open the catalog to page 9Manufacturer's Name: ASTEL, Podjetje za projektiranje, proizvodnjo in trgovino, d.o.o. Manufacturer's Address: Dutovlje 138 6221 Dutovlje Slovenija declares that the products Item, Product Name and Model Number: 1. Fountain LED light CASCADA series conform to the following Product Specifications: EMC: EN 55015:2006 + A1:2007 Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CE-marking accordingly: - the EMC Directive 2004/108/EC - the Low Voltage Directive 2006/95/EC ASTEL d.o.o. Dutovlje 138 6221 Dutovlje Slovenija...
Open the catalog to page 1035 Pages
43 Pages
2 Pages
56 Pages
25 Pages
12 Pages
12 Pages
12 Pages
12 Pages
12 Pages
12 Pages
12 Pages
4 Pages
4 Pages
8 Pages
16 Pages
16 Pages
16 Pages
16 Pages
4 Pages
16 Pages
12 Pages
4 Pages
4 Pages
12 Pages
12 Pages
12 Pages
4 Pages
12 Pages
12 Pages
12 Pages
52 Pages
60 Pages
36 Pages
8 Pages
48 Pages
40 Pages
48 Pages
12 Pages
8 Pages