ARCUS LRM01 INTERIOR & EXTERIOR LIGHT Operating Instructions LIGHTING

The ARCUS LRM01 series of very innovative multi-color RGB LED interior & exterior light is built-in waterproof stainless steel casing with different front shapes and lighting angles. It is suitable for using as interior and exterior downlight and step or staircase light. The most advanced electronic design with built-in microprocessor enables network connection and simple control of complete group of the The ARCUS LRM01 series is designed to light to the floor under the angle of 45 degrees or straight. The main feature is that ARCUS LRM01 series allows changing of the color of lighting manually...

COMPONENTS AND CONNECTORS 5 5 4 1 3 4 1 2 2 3 (1) Optical window High-Grade Polycarbonate Glass Optical Window. (2) Interior & exterior light casing Stainless steel casing with fixing holes for surface-mount models or basic mounting plate for railmount model. (3) Face shape Different stainless steel face shapes. (4) Wires Red, black and green wires to connect the 12-24Vdc power supply and control. (5) Fixing screw Two fixing screws to fix the interior & exterior light on the flat surface or to fix the basic mounting plate to the rail for rail-mount model. 4

INSTALLATION The interior & exterior light kit consists of the following components: Interior & Exterior Light ARCUS LRM01 2 x fixing screw 2.9x13 or M4x8 for rail-mount model Operating Instructions with Declaration of Conformity and Warranty conditions The ARCUS LRM01 has to be installed on a flat surface of the staircase, ceiling or floor. The installation has to be realized by a qualified personnel. SCREW 2.9X13 SEALING FACE SHAPE BODY BOARD Surface preparation The interior & exterior light is recommended to be installed on the location to allow the best illumination and lighting effects....

Connection The interior & exterior light has to be connected as described in the table below: RED GREEN BLACK F1A ARCUS LRM01 wire color Red Black Green FUNCTION + DC Power Supply GND Power Supply Control The power supply has to be connected through the switch (not included) with correct polarity and protected by a fuse (not included). The power supply voltage range has to be from 10 - 30Vdc. The control of the unit has to be connected through the momentary switch (not included) to the +DC by using a 2-pole signal cable extension (not included) to turn-on and turn-off the interior & exterior...

CONTROLS The interior & exterior light can be controlled by using the momentary switch. The color or mode of lighting can be changed sequentially by pressing the momentary switch for 1 second: ARCUS LRM01 Sequence of lighting Custom Color Cool White Daylight White Warm White Red Green Blue Rainbow Color Spectrum Turning on /off Press the momentary switch shortly. Changing the color or mode of lighting Press the momentary switch for 1 second. Setting the Custom Color At the selected Rainbow Color Spectrum mode press the momentary switch shortly to turn the light off. After that press the momentary...

Power supply Lens angle Optical window Luminous flux Lighting color Operating temperature 60° (angular lighting) or 90° (straight lighting) High-grade polycarbonate glass 040 mm X 26mm (slope front shape) 050 mm X 26mm (gentle front shape) 75g (slope front shape) 95g (gentle front shape)

1. The equipment manufactured by ASTEL d.o.o. is warranted to be free from defects in workmanship and materials under normal use and service. 2. This Warranty is in effect for of two years from the date of purchase by the user. Proof of purchase must be included, to establish that it is inside the warranty period. 3. This Warranty is transferable and covers the product for the specified time period. 4. In case any part od the equipment proves to be defective, other than those parts excluded in paragraph 5 below, the owner should do the following: (a) prepare a detailed written statement of the...

ASTEL, Podjetje za projektiranje, proizvodnjo in declares that the products 1. Interior & Exterior light ARCUS LRM01 conform to the following Product Specifications: Supplementary Information: The products herewith comply with the requirements of the following Directives and carry the CE- marking accordingly: