Dock shelter Crawford DS6070R The global leader in door opening solutions ASSA ABLOY Entrance Systems Inflatable dock shelter The food industry puts high demands on loading bay sealing in order to keep the cold chain as intact as possible. The dock shelter must provide continuous weather protection throughout the entire loading and unloading operation. The shelter is inflated around the docked vehicle, providing complete sealing. The Crawford inflatable shelters are suitable for a wide range of vehicle sizes and their sealing capacity exceeds by far the standard normally required by operators. The top seal of the Crawford DS6070R inflatable shelter is a roller design – automatically activated for low or high vehicles. In addition, it follows all vertical movements of the docked vehicle, continuously providing high tightness. In rest position, the Crawford DS6070R inflatable shelter is completely retracted behind the side structures, giving the vehicle driver the possibility to use the complete width of the loading bay when reversing into it. In addition, yellow front line indicators further facilitate the dock-in navigation. Stable collision protectors at the ramp height prevent shelter damages. Insulated top and side panels The inflatable dock shelter is installed into a frame construction covered by insulated panels, giving additional insulation effects. The design facilitates easy and fast component exchange, should this be needed. Nominal width Nominal depth Fabric quality Top curtain Side bag rear Side bag front Option wear shield PVC coated polyester 650 g/m2, thickness 0,6 mm 600 g/m2, thickness 0,5 mm 2500 g/m2, thickness 2 mm 3400 g/m2, thickness 3 mm 230 V, 1-phase, 50 Hz, 250 W noise level: 65 dBA in working position switch control included other controls available as option Temperature range Nominal free height High quality material composition The side and top inflatable airbags are made of impact resistant material with a strong, woven core. It is non-flammable, colour stable and highly resistant to weather impacts – in other words a material well suited for optimal function in rough docking environments. Nominal height

Nominal width Nominal height Nominal depth Free height above level* Installation height Dock height Vehicle height Fixing points depending on MH (installation height) maximum sizes Support bracket* * belongs to the wall fixing Concrete wall Insulated wall Wall fixings ASSA ABLOY, Besam, Crawford, Megadoor and Albany, as words and logos, are examples of trademarks owned by ASSA ABLOY Entrance Systems or companies with in the ASSA ABLOY Group. Technical data subject to change without notice. Wall mounting profile* © ASSA ABLOY Entrance Systems AB