Dock leveller Crawford DL6030C The global leader in door opening solutions ASSA ABLOY Entrance Systems Telescopic lip dock leveller for both trucks and vans The electro-hydraulic Crawford DL6030C Combidock eliminates the need for different ramp heights and thereby reduces building costs. It is advisable to equip every frequent loading area with at least one Crawford DL6030C Combidock so that vehicles of all sizes can he efficiently handled. The telescopic lip is supplied in high-stability aluminium alloy which extremely flat, resulting in smoother passages between leveller and truck bed – giving ergonomic as well as economical advantages due to reduced chock loads for people and less wear and tear on the handling equipment. Vehicles sink and rise during loading and unloading. A special safety control system ensures that the leveller automatically follows the vertical movements of the vehicle bed. Should the bed move horizontally, the same automatic system keeps the lip against the bed, facilitating safe and smooth passages. Lorry or van - just turn the switch Simply set the selection switch and the relevant automation program is started. When set on “Small Lorries”, leveller lip side tongues are retracted and the width is reduced by 1000 mm. At the same time, the down-force of the leveller platform is reduced by a hydraulic unit. Just use the selector switch for return to standard lorry performance. Technical Data Nominal length Nominal width Load capacity lorries 60 kN (6 tonnes) vans 20 kN (2 tonnes) Platform tear-plate thickness Max. point load leveller platform Control unit protection class Nominal voltage Control unit standard truck / city van mode Impulse auto button. Optional with door operation European standard Nominal motor power Crawford 950 series - the intelligent, all in one, docking control system The innovative and unique 950 series docking control system gives you direct control of the dock leveller, dock shelter and door all in one control unit. With only a few self explaining buttons it is easy to operate, to meet the demands of modern logistics. Separate steering units or complex wiring are no longer needed. Vertical working range Rise above dock Fall below dock

Dimensions Dimensions Vertical working range * when tail lift is in use Nominal length Leveller extension Leveller height Working range above dock level Lowest Position Working range below dock level Tail lift area Leveller frame Control unit (included in the delivery) Conduit for wiring internal diameter 50, angles <45° (by others) Mains supply: Control cable: Optional safety switch on sectional door to disable leveller when door is closed* Operating functions for combidock levellers 950 CD = Combidock L = Leveller A = Auto Button D = Door S = Shelter Technical data subject to change without...