Crawford 680 Loadhouse Heavy duty stand alone loadhouse The Crawford 680 Loadhouse is an independent loading system, containing all the relevant components: leveller, shelter and door. Together with the Autodock bottom platform and an insulated or non insulated cladding house, a complete, stand-alone dock loading system is formed. Placed outside the door opening of a warehouse or terminal, the operator will gain inside space advantages compared to a conventional, inside docking installation in new as well as in existing buildings without any major building modifications. Due to the thermal separation between building and docking unit, the Load House can be used in temperature controlled applications. The Crawford 680 Loadhouse is the heavy duty version of the new generation of load houses, especially developed to meet all requirements of architects, builders and operators. It is suitable for all geographical areas with snow load up to 2,0 kN/m² and our static calculations are certified by a third party. The Crawford 680 Loadhouse is the safe and reliable choice including ideal support for the construction planning and building permission process. Same storage area, smaller building The load house makes it possible to move the actual loading and unloading area outside the building and thereby releasing the corresponding floor area inside. Better insulation The Crawford 680 Loadhouse also forms a protective barrier between building and vehicle, contributing to energy savings and an improved working environment. Dock levellers and shelters can be integrated with the load house, together forming a complete Autodock® system. Cheaper construction As there is no need for complicated concrete pit construction the total cost of the building is reduced. ASSA ABLOY, the global leader in door opening solutions Technical Data Normal length1 0,6 mm profiled steel sheet Surface treatment Basic wind load Basic snow load Accumulated snow load 1) Other sizes on request

Nominal width dock shelter Assembly height dock shelter Recommendation: MH = 4500 for lorry-heights up to 4000 mm Nominal height dock shelter Dock height Total height Nominal length * Measurement only valid for insulated wall setup For uninsulated wall setup TH is 60mm less. For steel frame wall setup TH is 180mm less. When Loadhouse is supplied with rain pipe and gutter add 100 mm. Cladding types For optimal insulation the I-insulated type is provided with 40 mm insulated cladding. The U-uninsulated type is provided with non-insulated profile sheet material cladding. For applications where the...