Patron® REVOLUTION long cuff
1Pages

askö GmbH Product information and instructions Article-No.: Model Name: Patron® REVOLUTION long cuff Design & Konstruktion: Description: The models of the Patron® range stand out due to their wide variety and very broad field of application in the area of leather gloves. Proven in use 100,000 times. The Patron® REVOLUTION is suitable for use in direct firefighting (flashover, inside attack) as well as recovery, rescue and technical assistance within the meaning of DIN EN 659:2008 (DIN EN 659+A1+AC:2009). Absolute fit accuracy within the sizes and high dexterity due to anatomical and threedimensional cut. Sizes: Colours: Materials: Palm, backhand: Special nappa calfskin, heat-resistant, water-repellent, tanned tob e shrink-optimized, special softness due to the selected greases, washable up to 60 degree Additionally reinforced with elastic knitwear Kevlar with carbon/silicone coating Special nappa calfskin, heat-resistant, water-repellent, tanned tob e shrink-optimized, special softness due to the selected greases, washable up to 60 degree 3 -D -performance lining, consisting of aramid Split cowhide, cuff end with nappa calfskin, adjustable strap with flap and Velcro® closure Hipora moisture barrier, waterproof, windproof, breathable Reflex stripes yellow on cuff 50 mm, wet reflective, ring and carabiner hook, label „PATRON REVOLUTION“ and „DAS ORIGINAL" on end of cuff Palm: Finger layers: Internal lining: Cuff: Insert: Applications: Product instructions: Cleaning: For drying hang up on the fingertips In order to ensure the durability oft the glove, we recommend the use of commercially available cleaning detergents. The gloves must be checked for integrity before they are used again. Do not tumble dry, do not spin, dry clean requires prior advice from a recognized professional. For changes to the properties the manufacturer is not able to accept any liability here. Service life: The service life of glove depends on degree of wear and use of intensity in field of application. There is no possibility to give some information about service life. Storage / disposal: Store the gloves in a dry, light-protected and clean place. Damaged or no longer required gloves can be disposed of with household waste. Pictograms and power levels according to DIN EN 659:2008 (DIN EN 659+A1+AC:2009) CAT III Parameter Burning time / Glowing time=0 Convective heat resistance (DIN EN 367) Radiant heat resistance (DIN EN ISO 6942) Back 48 Palm 27 Mean value 44 Contact heat resistance (DIN EN 702) Seam breaking strength (DIN EN ISO 13935-2) Performance data according to DIN EN 388 – mechanical riski A = Abrasion resistance (number of cycles) B = Cut resistance (Index) Coupe Test C = Tear resistance (N) D = Puncture resistance (N) For the declaration of conformity please visit www.askoe-online.de 1 or rather A = low level; 4, 5 or rahter F = high level; x = not examined Performance levels according to DIN EN ISO 13997: 0624 – Centro Tessile Contoniero e Abbigliamento S.p.A. P.zza Sant Ánna, 2 21052 Busto Arsizio (VA) - Italy askö GmbH – Innovative Schutzausrüstung Adolph-Kolping-Str. 6, D – 72393 Burladingen Tel: 07475 / 95000-0 Fax: 07475 / 9500-29 E-Mail: info@askoe-online.de W