askö TRON
1Pages

askö GmbH Product and use information Artikel-Nr.: model name: askö TRON Design & Konstruktion: Description: futuristic technical rescue glove for the highest demands in safety, fit, material and Design, very good freedom of movement due to elastic material Spandex in the back of the hand, extensive protective function due to the use of PU coated palm reinforcements, HSP/Fiberglas inner lining ; Vibration-inhibiting palm pad, anatomically optimal finish with cold / heat-regulating neoprene, flexible width adjustment on the wrist, touch screen thumb and index finger, thumb back with sweat absorber Size: Colour: Materials: back of Hand: Simmering and finger protection: Palm and layers: Reinforcement palm and fingertips: Lining: Cuffs final: Spandex 95% Polyester 5% Elastane 100 % Polyvinylchlorid 100% polyester Amara, thickness min. 0.7-0.9 mm 100 % Polyurethan m 40% High Strength Polyäthylen, 40% Polyester, 20% Fiberglas 100 % Polyester Neopren To ensure the durability of the glove, we as the manufacturer recommend the care by means of commercially available cleaning agents (eg brushes, cloths, etc.). Before reuse, the gloves should be checked for integrity. Not in the dryer, do not fling. Dry cleaning requires the prior consultation of a recognized specialist company. For changes of the characteristics the manufacturer can not take over adhesion here. The service life depends on the degree of wear and the intensity of use in the respective fields of application. Time information on the service life is therefore not possible. Storage / Disposal: Store the gloves in a dry, well-protected and clean place. Damaged or no longer needed gloves can be disposed of with household waste. Pictograms and performance levels according to DIN EN 388:2016 CAT II Parameter Performance levels according to DIN EN ISO 13997: E = cut resistance (N) 1 bzw. A = low power level; 4, 5 bzw. F = high performance level; x = Not checked performance requirement to DIN EN 388- mechanical risks exam A = Abrasion resistance (number of cycles) B = Cut resistance (index) Coupe test C = Tear strength (N) D = Piercing power (N) 0624 – Centro Tessile Cotoniero e Abbigliamento S.p.A. – Piazza S.Anna, 2 I – 21052 Busto Arsizio (VA) askö GmbH – Innovative Schutzausrüstung Adolph-Kolping-Str. 6, D – 72393 Burladingen Tel: 07475 / 95000-0 Fax: 07475 / 9500-29 E-Mail: info@askoe-online.de Website: www.askoe-online.de The declaration of conformity can be found at www.a