askö GmbH Product and use information Article-No.: Model name: askö SURVIVOR Design & Construction: Beschreibung: high-quality technical rescue glove with new design and optimized fit, very good freedom of movement due to elastic material Spandex in the back of the hand, extensive protective function due to the use of PU coated palm reinforcements, HPPE inner lining, vibration-inhibiting palm pad, bacteria- and blood-resistant waterproof membrane, flexible cuff with dirt stop function, reflective Piping, pull-on loops, touchscreen-thumb and index finger Size: Colour: 5 – 13 7149 black-red, 5003 neon yellow-blue, 7153 black-neon yellow Materials: Back of Hand: ankle protection: Palm: Reinforcement palm and fingertips: Lining: Membrane: cuffs final: Spandex 95 % Polyester 5 % Elasthan 100 % Neoprene 100 % Polyester Amara, thickness min. 0,7-0,9 mm 100 % Polyurethanes 40 % Hsp (High Strength Polyethylene), 40 % Polyester, 20 % Polyglass 100% Polyurethane, waterproof, breathable, vapor permeable, bacteria and blood resistant 100 % Polyester To ensure the durability of the glove, we as the manufacturer recommend the care by means of commercially available cleaning agents (eg brushes, cloths, etc.). Before reuse, the gloves should be checked for integrity. Do not tumble dry, do not spin. Dry cleaning requires the prior consultation of a recognized specialist company. For changes of the characteristics the manufacturer can not take over adhesion here. The service life depends on the degree of wear and the intensity of use in the respective fields of application. Time information on the service life is therefore not possible. Storage / Disposal: Store the gloves in a dry, well-protected and clean place. Damaged or no longer needed gloves can be disposed of with household waste. Pictograms and performance levels according to DIN EN 388:2016 CAT II Parameter E E = cut resistance DIN EN ISO 13997 C = Tear strength (DIN EN 388) Performance levels after DIN EN ISO 13997: E = cut resistance (N) 1 bzw. A = low power level; 4, 5 bzw. F = high performance level; x = Not checked Performance request after DIN EN 388- mechanical risks Prüfung A = Abrasion resistance (number of cycles) B = Cut resistance (index) Coupe test C = Tear strength (N) D = Piercing power (N) 0624 – Centro Tessile Cotoniero e Abbigliamento S.p.A. – Piazza S.Anna, 2 I – 21052 Busto Arsizio (VA) askö GmbH – Innovative Schutzausrüstung Adolph-Kolping-Str. 6, D – 72393 Burladingen Tel: 07475 / 95000-0 Fax: 07475 / 9500-29 E-Mail: [email protected] Website: www.askoe-online.de For the declaration of conformity please visit www.a