*myarchiexpo

Mustang Pro

1 / 2 PagesView full catalog

Mustang Pro

Product catalog summary

Levelling System Instructions

Base Placement:

After applying adhesive, insert the base under the tiles along all four sides.
Depending on the tile size, place one or more bases on each side of the tile.
Position the tile and tap it with a rubber mallet to ensure it is level.

Wedge Insertion:

Insert the wedge into the base slot, ensuring not to exceed the breakpoint.
Using the Mustang Pro tool is recommended to facilitate this process.

Base Removal:

Once the adhesive has set, remove the protruding part of the base. This can be done with a rubber mallet or by foot, striking parallel to the joint.

Specifications:

Joint width options: 0.5 mm, 1 mm, 1.5 mm, 2 mm, 3 mm, 5 mm.
Tile thickness: Minimum 3 mm, Maximum 20 mm.

Additional Information:

The Mustang Pro tool improves fitting and eases placement.
Contact information: Pol. Ind. La Alberguería, C/ Jaime Velasco, 25, 31230 Viana (Navarra), Tel. 0034/ 948 446 941, Fax 0034/ 948 446 943, www.arttros.com, [email protected]

Catalog excerpts

TABLA PARA EL CÁLCULO DE PIEZAS DATA CALCULATION IN PIECES X cm 10 200 SISTEMA DE NIVELACIÓN LEVELLING SYSTEM Pol. Ind. La Alberguería · C/ Jaime Velasco, 25. 31230 Viana (Navarra) Tel. 0034/ 948 446 941 - Fax 0034 / 948 446 943 www.arttros.com • [email protected] SISTEMA DE NIVELACIÓN LEVELLING SYSTEM MEJORA LOS ACABADOS Y FACILITA LA COLOCACIÓN IMPROVE THE FITTING AND MAKE THE PLACEMENT EASIER ANTES / BEFORE DESPUÉS / AFTER CUÑA /

Open the catalog to page 1

Colocación de la base: 1. Después de extender el cemento cola, colocar las bases debajo de las piezas en los 4 lados. 2. Para piezas de gran tamaño usar dos o más bases por lado. 3. Colocar la baldosa y golpear con el mazo de goma. Inserción de las cuñas: 1. Insertar las cuñas en el alojamiento apretando sin superar el punto de rotura. 2. Para facilitar esta tarea se aconseja el uso del Mustang Pro tool. Eliminación del soporte: Una vez ha fraguado el cemento cola, para arrancar la base basta con golpear con el mazo de goma o con la punta del pie en la dirección de la junta. Ancho de la junta:...

Open the catalog to page 2

All ARTTROS LEVELLING SYSTEMS catalogs and technical brochures

Arttros Catalogue
12 Pages
Mustang Lite
2 Pages
Mustang Tetra
2 Pages
Babel
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list