Catalogs >
artnovion >
GlueArt 2.0

GlueArt 2.0
2Pages

Catalog excerpts

GlueArt 2.0 Fixing Systems RESIDENTIAL & Hi Fi PRO AUDIO & STUDIO Speciﬁcations GlueArt 2.0 is a polymer-based glue, speciﬁcally designed to bond to acoustic foam and EPS. POP is a polymer with superior adhesive eﬃciency, with double the initial tack of the GlueArt 1.0. it presents higher durability, faster bonding, and is completely humidity-resistant. It is applicable on a vast range of surfaces, including cement, painted surfaces, stone, wallpaper, plasterboard, wood, chipboard, PVC, expanded plastic, mineral ﬁbres and metal. It is also resistant from -40 to 90ºC. 1 Box | Each box contains 12 tubes. One Box installs either 96 ﬂat foam panels (Agad, Thor, Myron E, etc.) or 96 nestled foam panels (framed absorbers) GlueArt 2.0 is especially easy to use, gluing lighter panels such as Myron E practically instantly. Heavier panels, although requiring initial support, start to bond after just 10 minutes, bonding with a safety factor of over 10. 1 Tube unit | One Tube installs either 8 ﬂat foam panels (Agad, Thor, Myron E, etc.) or 8 nestled foam panels (framed absorbers)diﬀuser) Description Our new GlueArt formula has several improvements over the previous version: - Glues faster - Bonds perfectly with EPS (Myron diﬀuser) and foam - Humidity proof - Adheres to virtually any surface - Non-ﬂammable and non-irritant to skin. Does not release harmful vapours. - Has double the tack force of our previous GlueArt formula. - It glues Myron diﬀusers almost instantly. - Even though it will be necessary to initially support our heavier panels it is possible to glue any Artnovion panel with our new GlueArt - Installs 30% more panels per tube of glue than the previous version.

Open the catalog to page 1

GlueArt 2.0 Fixing Systems RESIDENTIAL & Hi Fi PRO AUDIO & STUDIO Instructions 1. Apply the adhesive to the back of the panel with a pressure gun. If applying to an extremely irregular surface, apply adhesive to both the panel and the target wall area. 2. Place the panel on the wall in the correct position for a maximum of 10 minutes after applying the glue. Avoid making any adjustments to the panel after gluing so as not to reduce the glue force. The cure time depends on the application thickness, temperature, and air humidity.

Open the catalog to page 2

GlueArt 2.0 2Pages

Catalog excerpts

All Artnovion catalogs and technical brochures

GlueArt 2.0
2Pages