*myarchiexpo

MicConnect

Product catalog summary

Product Overview: Arthur Holm's MicConnect is a passive microphone surface mount designed for gooseneck microphones. It features a stainless steel surface mount, a push button, and LED indicators controlled by a third-party conference system. The device requires no power and uses a 3-pin XLR connection, making it easy to install and maintenance-free.

Specifications:

Materials: Stainless steel cover plate.
Functionality: Includes a push-to-talk button and a lid that lifts when the button is pressed. The microphone system is activated or deactivated via the button, with main control dependent on the audio unit.
LEDs: Green and red LEDs are activated from the main audio unit with a 5Vdc voltage.
Connectivity: Features a 3-pin XLR microphone connector and a 3-pin terminal block output. A 6-pin terminal block is used for control, with contact close push button and 5Vdc LED power indicators.
Mechanical Dimensions: Cover plate measures 92 x 92 x 3mm, and housing below the table measures 93 x 93 x 80-100mm. Suitable for mounting surface thickness from 16mm to 65mm.
Options: Available in painted or matte cover plate finishes.
Certifications: CE certified.
Warranty: 2 years general warranty.

Installation and Use: The MicConnect allows for easy microphone installation and removal without visible locking systems. It includes a shock-absorbing support and is designed for seamless integration into conference systems.

Catalog excerpts

MicConnect Passive microphone surface mount for gooseneck microphones Stainless steel surface mount Push button and LED controlled by third party conference system No power required 3-pin XLR connection Easy to isntall Maintenance free General Arthur Holm’s MicConnect is a static surface mount for XLR microphones with integrated shock mount, push to talk button and microphone status LED. The microphone is very easy to connect and disconnect. A special tool (included with the product) is necessary to remove the microphone. When there is no microphone connected the XLR connector is covered by a lid integrated in the system. MicConnect is made of stainless steel and standard and customized finishes are also available. ARTHUR HOLM Albiral Display Solutions SL · Fàtima, 25 · 08512 Sant Hipòlit de Voltregà · Barcelona, Spain · +34 938 502 376 · [email protected] · www.arthurholm.com Arthur Holm is a registered brand of Albiral Display Solutions SL. Specifications subject to change without previous notice. Make You

Open the catalog to page 1

Technical Specifications Stainless steel Materials Cover plate Push to talk button, push the button to lift the lid Microphone installed, push the button activate/deactivate the system Main control depends on the audio unit Green and red LED is activated from the main audio unit (5Vdc Voltage) • Matte cover plate • 2 years general warranty Consultants, architects and engineers specifications The passive microphone surface mount shall provide a 3-pin XLR connector. The cover plate shall be made of stainless steel, it shall include a shock absorbing support, push to talk button and 2 LED. The device...

Open the catalog to page 2

General Dimensions ARTHUR HOLM Albiral Display Solutions SL · Fàtima, 25 · 08512 Sant Hipòlit de Voltregà · Barcelona, Spain · +34 938 502 376 · [email protected] · www.arthurholm.com Arthur Holm is a registered brand of Albiral Display Solutions SL. Specifications subject to change without previous notice. Make Your Meetings Cou

Open the catalog to page 3

All Arthur Holm catalogs and technical brochures

Archived catalogs

AH17D3HDGATalk
4 Pages
AH15D3RHDGA
4 Pages
AH17D3RHDGATalk
4 Pages
AH17D3HDGA
4 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list