DynamicX2Talk
4Pages

AH15DX2HDGATalk DynamicX2Talk HDCP compliant aluminium retractable motorised monitor with integrated independent microphone lift system This picture corresponds to a customised version of DynamicX2Talk Features • Aluminium retractable monitor with an independent microphone lift • Vertical motorised monitor with up to 20° inclination • Patented single engine mechanism for up/down and tilt movements • Stainless steel customisable cover plate • Front double sided anti-reflective 2 sides coating 3 mm black edged glass • PA and Conference working mode Arthur Holm DynamicX2Talk is a motorised retractable product range that includes an independent lift for gooseneck microphones. The retractable monitor provides silent, reliable and harmonic movements by the use of a patented solution with one only engine. This automatic system is equipped with a variable speed system to raise, lower and tilt 20° to ensure the best ergonomics, viewing angle and visibility. The integrated independent lift system for microphones provides a rounded microphone coverlid and it not only makes the microphone disappear within the desk surface, but it also provides a pleasant light to indicate its status. Thanks to its protective and patented lighting ring, the microphones can be safely stored and protected making meeting and conference spaces more flexible and versatile. This system provides two different working modes: PA and Conference. When in PA mode, a push button placed on the stainless steel cover plate allows to activate or de-activate the microphone and the LED ring will indicate the status by changing colour from red to green. The system will automatically silence the microphone when retracting. When in conference mode, the microphone will be always active and both, the light ring and the access to the push button on the cover plate, will be available via GPI and GPO for remote control. The microphone lift can be adjusted to the exact length of the microphone via AHnet and AHlink. The AHlink is an excellent tool to diagnose, verify and configure DynamicX2 and DynamicTalk. The monitor is equipped with an Interactive Setup Display (ISD) allowing the control, setup and diagnose of the monitors. Monitors provide RS-422 I/O allowing the remote control of movements, speeds, safety settings, brightness, contrast and backlight. The monitors are equipped with an Auto Mechanical Calibration Movement System (AH-AMMC). The use of the Arthur Holm’s ERT will enable the address configuration of all the monitors installed in a table by simply pressing a button. The app AHlink Android and iOS allows getting the unit’s serial number without the need to have access to the unit from below the table. Interactive Setup Display (ISD) 360° LED lighting ring to indicate microphone status Maintenance free HDCP compliant Energy saving design, low consumption video controller Serial control and remote diagnosis Wireless connectivity for setup and control Individual monitor addressing Auto Mechanical Movement Calibration (AH-AMMC) ARTHUR HOLM Albiral Display Solutions SL · Fàtima, 25 Sant Hipòlit de Voltregà 08512 Barcelona, Spain · +34 938 502 376 · marketing@arthurholm.com · www.arthurholm.com Arthur Holm is a registered brand of Albiral Display Solutions SL. Specifications subject to change without prev

Technical Specifications Display Up/Down Control Microphone control GPI/O Contrast ratio Viewing angle Viewing area Response time Temperature (operating/storage) Button on upper cover plate LEDs control and switch FULL HD 15.6" TFT Active Matrix, widescreen format. LED backlight Button on upper cover plate Customised function Button on upper cover plate GPI contact closer RS-422 (RJ45 CAT 6) (Up/Down) Buttons on cover plate External power supply System consumption Monitor housing Anodised Aluminium AR 2-side with an anti-reflective coating on the glass surface. Thickness: 3.0 ± 0.3 mm...

Connectivity Panel Interactive Setup Display (ISD) Consultants, architects and engineers specifications Vertically retractable motorised 15.6" Full HD professional monitor including a universal microphone lift system. The monitor housing shall be made of milled anodised aluminium and the screen shall be protected with antireflective 2 side coating black edged 3 mm glass. The monitor shall make the rise/lower and tilt movements with one only engine. The monitor cover plate shall provide a passive opening system and shall be made of 3 mm brushed stainless steel. The monitor shall have a...

General Dimensions ARTHUR HOLM Albiral Display Solutions SL · Fàtima, 25 Sant Hipòlit de Voltregà 08512 Barcelona, Spain · +34 938 502 376 · marketing@arthurholm.com · www.arthurholm.com Arthur Holm is a registered brand of Albiral Display Solutions SL. Specifications subject to change without previous notice. Technology serving Desig