Care & Maintenance A guide to extending the life of your Artek products

Wood and wooden surfaces

Intro This guide will help you care for your Artek furniture. By following our instructions, you’ll keep your beloved items in good condition and assure them a long life. All Artek furniture has been designed for indoor use and storage in dry, warm spaces. If a product can be used outdoors, that will be mentioned in its specifications. We advise against placing any item too close to a heat source. We also recommend avoiding strong variations in humidity. Many Artek products have been in production for decades. Over time, different surface treatments and manufacturing methods have been used. The...

Wood and wooden surfaces We strive to select materials that are as uniformly coloured as possible, but some variation is unavoidable in order to keep production ecologically sustainable and material loss to a minimum. At Artek, we see the variability of woodgrain as one of birch’s most beautiful qualities. Sometimes, it yields striking flame patterns, which are enhanced through staining, as different parts of the wood absorb different quantities of stain. Birch and other types of wood are organic, living materials that react to atmospheric humidity. This can cause swelling or shrinking and may...

Protection and care Wipe the product at regular intervals using a soft cloth dampened with a solution of water and neutral detergent. Keep chemical exposure to a minimum. Dry the surface after wiping to eliminate any remaining moisture but avoid rubbing in order to prevent polishing. If you leave appliances on the surface, replace rubber pads with felt or another material that does not stain. Scratches made by sharp objects are more visible on surfaces with pigmented lacquer than those with clear lacquer. Stain removal In case wiping does not clean the surface, you can try to remove unwanted...

Protection and care For daily cleaning, wipe down the laminate with a damp microfiber cloth. Laminate boards can be cleaned with any household detergent that doesn’t contain abrasives. After wiping, be sure to dry the surface, particularly the seam where the laminate meets the wood edge band. Beware that leaving unglazed pottery on an Artek surface will wear out the laminate and cause an uneven polish. Window detergents can be used to prevent rings or streaks and to remove them if they do appear. Do not use acidic detergents intended for cleaning ceramic or limescale removers intended for appliances;...

Stain removal guide for laminate from laminate manufacturer Formica IKI Oy Soot, nicotine Alcohol, e.g. isopropanol, window cleaner Fruit stains wallpaper paste* Lipstick, shoe polish X X Nail polish Two-component glue stains cannot always be removed.

Protection and care Wipe the product using a cloth dampened with a solution of water and neutral detergent. Afterwards, dry. Use a microfiber cloth for daily cleaning. Remove grime using an undiluted neutral detergent. Rinse and dry thoroughly. Linoleum manufacturer Forbo recommends using a soapy wax. Stain removal Remove unwanted stains as soon as possible. You can try to remove them with undiluted neutral detergent. If that doesn’t work, try removing colour and water-insoluble stains with mineral spirits or denatured alcohol. Afterwards, wipe down the surface with a damp cloth and dry completely....

Fabric Artek furniture can be upholstered in a variety of fabrics made by different manufacturers, each with its own unique composition and character. To ensure a long life for your item, it’s important to select a material appropriate for your purposes and to follow the manufacturer’s instructions for use and care. Protect textiles from direct sunlight, which will fade their colouring. It’s a good idea to turn over the pillows on your furniture from time to time in order to wear them out more evenly. Artek padding and upholstery were designed for use in warm and dry places. Avoid exposure to...

Avoid Bleaching detergents on coloured fabrics. Spinning and tumble drying water-washable fabrics. Extensive rubbing during vacuuming, which will wear out the fabric. Brushing fabrics that pill. Sharp objects. Abundant use of water and humidity. Beating, as that may damage the weaving. UV light, such as from grow lights, and direct sunlight. Cold and humid conditions that may cause mould. For more information, please contact the manufacturer or importer of the fabric. Care instructions for fabrics manufactured by Artek Cotton Acrylic Coated Cotton Cotton Canvas 100% Acrylic Coated Cotton Lightfastness...

Protection and care To clean your item, use either a mild soapy solution or cleaning products made specifically for upholstery leather. Multipurpose cleaners may severely damage the leather, and wax or similar surface treatments may block its pores and prevent natural breathability. Vacuum regularly. Wipe dust from leather using a damp cloth or soft sponge. Protect leather from direct sunlight and heat. Do not place the leather- upholstered item too close to a heat source. Stain removal Pat stain using a sponge or cloth dampened with a mild soapy solution; do not rub. Finish by wiping area with...

Webbing The webbing used by Artek is 100% linen. In early 2019, we improved its quality and longevity and updated the colour range. Whereas earlier webbing underwent anti-stain treatment, our new standard quality is not treated with any chem icals. Products with webbing can be re-upholstered. Avoid Exposure to direct sunlight. Extensive rubbing. Stretching the fabric when it’s moist. Using recently cleaned furniture before the belt fabric has completely dried. Care Vacuum gently using a nozzle designed for use on textiles. Wipe with a damp cloth that does not pill or stain. Shampoo using a neutral...

For more info, please visit G Artekglobal G Artekglobal QArtek