Catalogs >
Armstrong Ceiling Solutions >
Prelude 24 Corrosive Resistant

Prelude 24 Corrosive Resistant
3Pages

Catalog excerpts

Exposed 24mm grid system for higher humidity environments. KEY FEATURES • Special paint finish and coated integral Cross Tee hook system for enhanced corrosion resistance • 700 hours salt spray test (EN ISO 9227) • Durability Class C (EN 13964) APPLICATION AREA Higher humidity areas PHYSICAL DATA • Material: galvanised steel with additional protective treatment • Surface finish: baked polyester paint • Colour: Global White

Open the catalog to page 1

PRELUDE 24 CORROSIVE RESISTANT - UNIVERSAL PEAKFORM MAIN RUNNER AND SUPERLOCK CLIP (BULB-TO-BULB CONNECTION) Item No. Dimensions (mm) Content / Carton Weight / Carton Cartons / Pallet Length Height pcs lm kg PRELUDE 24 CORROSIVE RESISTANT - TL+ CROSS TEES (HOOK SYSTEM, BUTT CUT) PERIMETER SOLUTION Corrosive resistant perimeter angle II B A WDNCR 20 H Bent tee bar hanger 57 for threaded rod 1700 I A CR827 G 1700mm hanger with hook Data Sheet - Prelude 24 Corrosive Resistant 125 T 1924 LB Corrosive resistant perimeter angle SECTION DRAWINGS PRELUDE 24 CORROSIVE RESISTANT - UNIVERSAL PEAKFORM...

Open the catalog to page 2

SYSTEM DRAWING (MODULE 1200 x 600mm) Standard lay-in installation of 24 mm exposed suspension system using Board or Tegular edge tiles. *reduce to 450 if heavy tile / overlays are used or heavy service fittings are located near the perimeter. Main Runner centres Quantities required per 1m2 (no waste included) (2) Cross Tee (3) Cross Tee (4) H (7) Universal 1200mm 1600mm (4) Hanger retaining clip (5) Perimeter trim approx. 0.70 lm/m2 The chart is for general guidance only. GRID LOAD CAPACITIES PRELUDE 24 CORROSIVE RESISTANT The following table gives the maximum permitted hanger distance (mm)...

Open the catalog to page 3