Swimming Pools and Wet Areas The specification of decorative finishes for high humidity or wet areas can be a challenge. Armourcoat can provide a perfect choice for demanding interiors which require a high-end aesthetic. Our extensive range of natural mineral finishes are naturally breathable and provide excellent resistance to mould, fungal or algal growth. Armourcoat finishes (in particular Spatulata) have been used to great effect on swimming pool ceilings to provide a seamless monolithic highly polished surface, great for light reflection and creating a spacious and opulent effect. Tough and hard wearing, Armourcoat finishes can also create rich and diverse decorative effects, such as blockwork or seamless Travertine stone. These finishes complement other natural materials such as glass, stone and timber.

Design Considerations 1. Work should be conducted when the pool is empty or good ventilation and humidity control are present. Humidity levels need to be low to ensure adequate drying rates. 2. Armourcoat Surface Finishes should only be applied to the walls of the swimming pools that will not get splashed in the routine use of the pool. However, walls that get splashed occasionally would be suitable. 3. It is not recommended for columns situated inside the pool or along the edge of the pool. 4. Where maintenance is difficult, Armourcoat Surface Finishes are not recommended. 5. There should always...

Morewood Close Sevenoaks Kent TN13 2HU United Kingdom T: +44 (0)1732 460668 F: +44 (0)1732 450930 E: [email protected]