ArmaFlex_750_Adhesive_TDS_EN

Product catalog summary

Overview: The document provides technical specifications and application guidelines for ArmaFlex 750, a specially formulated adhesive designed for NH/ArmaFlex Smart insulation materials. It highlights the adhesive's strong bonding capabilities and its halogen-free formulation.

Specifications:

Material Type: Contact adhesive based on polychloroprene, free of aromatic solvents.
Color: Beige
Temperature Range: Maximum service temperature is +90 °C, and minimum service temperature is -50 °C.
Flash Point: Approximately -12 °C
Storage & Shelf Life: 18 months in original unopened containers at 5 °C - 35 °C.

Application Guidelines:

Ideal application temperature is +20 °C, not below 0 °C.
Increased condensation may occur at temperatures below +5 °C or high humidity, affecting bonding quality.
Stir well before use and apply thinly with a brush or spatula.
Final strength is achieved after 36 hours; do not operate plants before this time.

Performance and Compatibility:

Yield: Varies based on material thickness and type (e.g., tubes or sheets).
Resistance: Very good ageing stability and weathering resistance.
Compatibility: Excellent adhesion to metallic bases; incompatible with asphalt, bitumen, or red lead paint.

Safety and Disposal:

Highly flammable liquid and vapor; refer to EC Safety Data Sheet for more information.
Waste disposal should align with the European Waste Catalogue and regional waste disposal guidelines.

Packaging and Pricing:

Available in 0.5 Litre containers, with 12 pieces per carton.

Catalog excerpts

ARMAFLEX 750 THE ADHESIVE FOR SUPERIOR NH/ ARMAFLEX SMART INSTALLATIONS Powered by TCPDF (www.tcpdf.org) Strong Bonding Specially formulated adhesive the next generation of halogen-free Armaflex insulation materials Powered by TCPDF (www.tcpdf.org

Open the catalog to page 1

Technical Data - ArmaFlex 750 [Adhesive] Brief description Special adhesive for installing the next generation of NH/ArmaFlex Smart. See also "Overview Adhesive Application". Material type Contact adhesive on polychloroprene basis, free of aromatic solvent. Material Special Information Gluing flexible NH/ArmaFlex Smart materials (see above). Special Features Specially formulated adhesive for uniform and safe seam bonding of flexible NH/ArmaFlex Smart insulation materials. Please observe our installation instructions / product data. Application temperature: ideally + 20 °C, not below 0 °C. At...

Open the catalog to page 2

ArmaFlex 750 [Adhesive] adhesive Code ADH750/0,5 Article description ArmaFlex 750 Adhesive, 0,5 Litre 2022 © Armacell Enterprise GmbH & Co. KG – Pricelist applies to Masterdata Prices valid from 20.02.2020, substituting all previous prices. Subject to alterations without prior notice. Our general conditions of sales & delivery shall apply.

Open the catalog to page 3