TILTING & BI-SECTIONAL DOORS

T I LT I N G D O O R S A non protruding up-and-over garage door opens in one piece and can sit flush with the facade cladding when closed. This contemporary and sleek system can be used for wooden or metal doors up to 600 kg. A counterweight, with or without reduction, helps the door in its movement. As the door is non protruding, it may sit in a chambering, even with double sealing. If desired, you can purchase a corresponding motor to automate the door. ARLU® is the manufacturer behind the argenta® and rob® brand names. Rob has been a pioneering brand in outdoor hardware for more than 80 years....

tilting doors general info Four rollers, placed on the four corners of the panel, guide the door in its tracks. This applies up to and including the series 715.000 (up to 200 kg). For the heavier series, 2 tracks are placed above the door leaf, provided with single wheels on heavy duty ball bearings The lower wheels are always equipped with a parachute protection to prevent the door from falling in the event of a cable rupture. A counterweight will help the door in its movement. Once correctly leveled, you will not need to make any further adjustments. As the door is non protruding, it may sit...

rob 713.000 The weights are placed in a space-saving casing to the left and right of the door. Of course, one cannot choose freely in the placement of the counterweights. DOOR WEIGHT

assemble your set Technical drawing ProfilesThe profiles bundle consists of: • 2 upper profiles Door height Article number Casing & containersCasing and containers set consists of: • Container casing • Cover casing • Plastic container Door height Article number Parts Door height Article number tilting doors The box of parts consists of: • 1 tension belt • Left and right head piece • Left and right load-bearing roller • Left and right safety guide with cable • Left and right casing fixation Weight The container can be filled with an iron scrap to balance your door. Required weight = door weight...

rob tilting doors713.000 assemble your set Rubber seal with profile The rubber seal at the bottom of the door has the same installation dimensions as the safety strip for the automation. This allows the door to be safely automated later without having to modify the door leaf. Max. door width Article number Rubber seal Lock fittings Galvanised Black Brown Single-action lock fittings (A) Double-action lock fittings (B) + lock bar according to door height (and width) Length Article number Additional suspension bars It is possible to purchase additional suspension bars as an option. Length Article...

The 200 kg door is also lifted by a counterweight with or without reduction. This weight can be placed anywhere. The side-mounted carrying wheels allows you to choose the panel's thickness. DOOR WEIGHT

Technical drawing Container By using a reduction, the movement length of the counterweight is halved and there is certainly always sufficient height. Version without reduction (weight = door weight / 2) Article number Version with reduction (weight = door weight) Connection iron for load-bearing equipment Connection iron for load-bearing equipment 2 x roller in threaded bracket Container 40 litres Steel cable Opening in open position: 4 mm steel cable consists of: installation A (vertical profile length = door height): - in the open position, the door is still 130 mm in the opening • Cable at...

rob tilting doors715.000 assemble your set Rubber seal with profile The rubber seal at the bottom of the door has the same installation dimensions as the safety strip for the automation. This allows the door to be safely automated later without having to modify the door leaf. Max. door width Article number Rubber seal Lock fittings Galvanised Black Brown Single-action lock fittings (A) Double-action lock fittings (B) + lock rod according to door height (and width) Length Article number Additional suspension strips It is possible to purchase additional suspension strips as an option. Length Article...

rob 716-726.000 The 300 kg door is also lifted by a counterweight with or without reduction. This weight can be placed anywhere. The overhead carrying wheels are equipped with heavy duty ball bearings to cope with this heavier door weight. If a thicker cladding is to be added to the door, it is best to choose an extended roller. DOOR WEIGHT

assemble your set Technical drawing Container A version with reduction ensures a smaller movement so that the weight has sufficient space between the ceiling and floor; therefore, this is strongly recommended. Version without reduction (weight = door weight / 2) Article number Version with reduction (weight = door weight) Article number Connection iron for load-bearing equipment 709.720 Connection iron for load-bearing equipment 709.740 709.220 2 x roller in threaded bracket 2 x 708.265 Opening in open position: Normal version: door > opening (door thickness is min. 50 mm): Minimum version: in...

rob tilting doors716-726.000 assemble your set Rubber seal with profile The rubber seal at the bottom of the door has the same installation dimensions as the safety strip for the automation. This allows the door to be safely automated later without having to modify the door leaf. Max. door width Article number Rubber seal Lock fittings Galvanised Black Brown Single-action lock fittings (A) Double-action lock fittings (B) + lock rod according to door height (and width) Length Article number Additional suspension strips It is possible to purchase additional suspension strips as an option. Length...

rob 717-727.000 The 600 kg door is also lifted by a counterweight with or without reduction. This weight can be placed anywhere. The overhead carrying wheels are equipped with heavy duty ball bearings to cope with this heavier door weight. If a thicker cladding is to be added to the door, it is best to choose an extended roller. DOOR WEIGHT