OPENING DOORS

ARLU, THE REFERENCE FOR OPENING DOORS ARLU® is the manufacturer behind the brand names argenta® and rob®. Argenta has been a leading brand in door hardware for over 100 years, but today it is mainly synonymous with invisible door systems. Minimalist architecture swears by clean lines and a “back to the essence” mentality. In terms of interior doors, this results in integrated door fittings, invisible integrated techniques, door frames and skirting boards for revolving, sliding and pivoting doors. Argenta stands for a full range of sleek interior solutions. Our furniture hardware can be both top-hung...

argenta 550/560.000 The tracks used are made of either aluminium or galvanised sheet steel. A variety of single or double tracks are used to slide the doors together. The rollers in this series, are single – up to max. 20 kg per leaf – or double rollers up to max. 30 kg per leaf. They are mounted on the top edge of the doors using support plates. The rollers on ball bearings are made of plastic and are especially smooth. An alternative form of rollers for lateral mounting for panels from 18 to 48 mm is also available. anodised aluminium

assemble your set Technical drawings Tracks Max. door width Length Reference 1050 mm Single aluminium track 1500 mm Single steel track 750 mm 1500 mm 550.000.150 Double aluminium track As per setup 3000 mm Accessories selection Max. 20 kg per panel Reference Fitting set with single rollers 550.100 Max. 30 kg per panel Reference Fitting set with double rollers Every fitting set comes with all the rollers, suspension, guiding systems and stopper you need. One fitting set is required per door panel. furniture hardware for wooden panels possible configurations furniture hardware for wooden panels

assemble your set Tracks Tracks Max. door width Single aluminium track 1500 mm Double aluminium track As per setup 3000 mm Single steel track Accessories selection Accessories selection JL Fitting set with single rollers Fitting set with single rollers Fitting set with single rollers Fitting set with single rollers Fitting set with single rollers Fitting set with single rollers Fitting set with double rollers Fitting set with double rollers Fitting set with double rollers Fitting set with double rollers Fitting set with double rollers Fitting set with double rollers Every fitting set comes with...

argenta SPRINT With this system, cabinet doors weighing up to 35 kg per panel can be finished in a minimalist way using a built-in top track. A bottom guide system behind the door for up to two panels sitting in front of each another or a smaller bottom guide system complete this invisible fitting. Silent operation combined with an invisible soft close guarantee an extremely comfortable experience. anodised aluminium

argenta sprint recessed suspension and bottom guide at the back Running track Bottom guide track rear view of panel 19 Accessories selection If stopper used: A = min. 60 mm If soft close used: A = min. 30 mm Reference Front panel Rear panel Softclose expansion Every fitting set comes with all the rollers, suspension, guiding systems and stoppers you need. One fitting set is required per door panel. The soft close must be ordered separately. * With 1 softclose — min. door width = 345 mm, with 2 softcloses — min. door width = 525 mm possible configurations If two panels are used, the AF9.800.01...

argenta sprint recessed suspension and bottom guide at the edge Technical drawings 23 assemble your set Tracks Running track Bottom guide track Accessories selection Reference Softclose expansion Every fitting set comes with all the rollers, suspension, guiding systems and stoppers you need. One fitting set is required per door panel. The soft close must be ordered separately. * With 1 softclose — min. door width = 385 mm, with 2 softcloses — min. door width = 592 mm possible configurations If two panels are used, the AF9.800.01 carrier carries the rear door.

argenta sprint recessed suspension at the back and bottom guide at the edge Technical drawings 23 Running track Bottom guide track If stopper used: A = min. 60 mm If soft close used: A = min. 30 mm Accessories selection Reference Softclose expansion Every fitting set comes with all the rollers, suspension, guiding systems and stoppers you need. One fitting set is required per door panel. The soft close must be ordered separately. * With 1 softclose — min. door width = 345 mm, with 2 softcloses — min. door width = 525 mm If two panels are used, the AF9.800.01 carrier carries the rear door. possible...

argenta 501.000 The easy-to-assemble cupboard door fitting of the 501.000 series provides smooth and quiet operation for panels with a maximum weight of 25 kg.

assemble your set Tracks Running track white Running track brown Accessories selection Gear white Gear brown All fitting sets come with the necessary rollers, guiding systems and stoppers . One fitting set is required per door panel. possible configurations

argenta SYMFO 60 Symfo 60 combines a top guiding system with bottom sliders to support doors up to a maximum weight of 60 kg . These fittings are suitable for panels between 16 and 19 mm thick. The rollers are attached at the back of the panel. grey anodised

assemble your set Technical drawings without upper roller guide Tracks & profiles Top guiding track Top guiding profile Door handle profile Sealing strip Adhesive conductive strip Bottom profile for 16 mm panels Bottom profile for 19 mm panels Bottom running track Max. door width Length Grey anodised White Black 2000 mm with upper roller guide Running track cover 2000 mm 3000 mm 6000 mm furniture hardware for wooden panels possible configurations ][ Accessories selection Fitting set for 1 door Reference Wheels DK0.001 Upper roller guides and stoppers (side stoppers and pass-through stoppers)...

argenta symfo 60 Complete sets Bottom running & top guiding track Grey anodised A set includes all required parts for doors with an opening width of 2 or 3 metres, with panels that are up to 1 or 1.5 metres wide and up to 2600 mm tall. Aside from the fittings (type DK0.00X) and the top and bottom rails (with cover profiles), the frame profiles to affix the panels (16 mm/19 mm) are also supplied (with the bottom profile DK0.478. xxx), as are self-adhesive guiding strips. The stoppers and upper roller guides are not included in this set and must be ordered separately, e.g.: DK0.902 (upper roller...