TECHNICAL DATA SHEET Mod. AU-H 1240E PRS EQUIPMENT • 1 s/s support for no. 4 trays • 1 inlet hose (2 m lenght) • 1 drain hose (2,5 m lenght) GENERAL FEATURES • Ra ck dimensions: 55x55 cm • Total weight : 150 Kg • Washing cycles / racks/hour : 60”-120"-180” / 60-30-20 • Po ssibility of automatic start of washing cycle by closing the hood • Up per and lower rotating wash/rinse arms with stainless steel tube • Wash pump: 1300 W • Ta nk capacity: 40 lt • Bo iler heating elements: 9,0 kW • Ta nk heating elements: 4,5 kW • Water quantity per cycle: 3 lt • Electronic control panel • Display for boiler and tank water temperatures • Us eful washing height: 420 mm • Magnetic hood microswitch • Automatic filling of water • Electric rinse-aid dispenser • Electric detergent dispenser • Ho t rinse • Th ermostop-controlled rinse operating temperature • Break Tank incorporated according to EN 1717 • Atmospheric boiler • Vertical self-cleaning washing pump • Automatic end-of-day self-cleaning water tank WATER FILTRATION • Pre-filtering of tank water by means of no. 1 stainless steel filter • Single wash pump filter, easily removable BODY • AISI 304 stainless steel body • Preformed wash tank • Single skin hood • Ho od opening system with springs • Re movable upper and lower wash/rinse arms for easy cleaning • Boiler in AISI 316 stainless steel OPTIONALS • Drain pump • Warm water feeding (max. 85 °C) • Double skinned hood • Remote control system • HD Version (Total power 14,8kW, 380-415V3N ~ 50 Hz only) • 60 Hz version ACCESSORIES FOR WATER TREATMENT • Integrated water softener unit (“S” model) ACCESSORIES • Stainless steel pre-wash tables/exit tables • Racks special types INSTALLATION • Use the screws of the feet and a spirit level to ensure that the machine is levelled MAIN POWER SUPPLY • The voltage of main power supply must be compatible with the rated voltage • The machine must be connected to a suitable earth (ground) system • Connect the machine power socket to the multipole wall switch provided WATER SUPPLY CONNECTION • A water softener must be installed if the water is hard • The water pressure must be between 0.1MPa (1 bar), and, 0.5MPa (5 bar) • The tempe rature of the water-supply must be between 10°C to 50°C TECHNICAL SPECIFICATIONS • Voltage: 380-415V3N / 220-240V3 ~50 Hz • Total power : 10,3 kW • Amperage: 15 A / 26 A • Power cord supply size :5x4 mmq

VISTA POSTERIORE VUE ARRIERE A: USCITA CAVO Dl ALIMENTAZIONE OUVERTURE DE PASSAGE CABLE D’ALIMENTATION EXIT POWER CORD SUPPLY B: TUBO Dl SCARICO 0 INT. mm.28 LUNGHEZZA mm.2000 OUVERTURE DE PASSAGE TUYAU DE VIDANGE <t> INT. 28 mm, L=mm,2000. EXIT WATER OUTLET PIPE INT. <b 28 mm. L=mm.200CI. C: CANNA Dl CARICO CON ATTACCO G 3/4” LUNGHEZZA mm, 2000, OUVERTURE DE PASSAGE TUYAU D’ALIMENTATION EAU AVEC CONNEXION G 3/4” L=mm 2000. WATER INLET PIPE CONNECTION G 3/4” L=mm 2000.