TECHNICAL DATA SHEET Mod. AU 65-65 PRS EQUIPMENT • 1 s/s rack on wheels 66x81,5 cm • 1 water inlet hose ( 1,5 mt length ) • 1 water drain hose ( 2 mt length ) GENERAL FEATURES • S/S Rack 66x81,5 cm • Total weight: 195 Kg. • Washing cycles / racks/hour : 3’-6’-9’ / 20-10-7 • 3-way s/s upper and lower rotating wash arms • Independent rotating upper and lower rinse arms • Wash pump: 2 kW • Bo iler capacity: 11 lt • Ta nk capacity: 65 lt • Bo iler heating element: 9 kw • Ta nk heating element: 6 kw • Water quantity per cycle: 3,5 lt • Electromechanical control panel • Ta nk and boiler temperature gauges • Us eful washing height: 650 mm • Door microswitch • Au tomatic filling of water, direct into the tank • Hot rinse • Rinse booster pump • Break Tank incorporated according to EN 1717 • Atmospheric boiler • Ve rtical self-cleaning washing pump OPTIONALS • Electric detergent dispenser • Electric rinse-aid dispenser • Drain pump • Hot water filling (max 85°C) • 60 Hz version ACCESSORIES FOR WATER TREATMENT • Water softener unit - external fitting ACCESSORIES • S/S special racks for trays INSTALLATION • Level the machine acting on the adjustable feet ELECTRIC CONNECTION • The mains voltage must be the one indicated on the serial no. label • The machine must be connected to a suitable earthing system • Connect the power plug to a suitable omnipolar wall switch WATER FILTRATION • Pre-filtering of tank water made of no.1 s/s mesh basket filter • S/S ingle wash pump filter, easily removable BODY • Body in stainless steel • Do uble skinned body and door, insulated • S/S door handle • Preformed wash tank in s/s AISI 316 • S/S removable upper and lower wash/rinse arms for easy cleaning • Boiler in s/s AISI 316 WATER CONNECTION • Connect a water softener in case of hard water • The water pressure must be between 0.1MPa (1 bar) and 5MPa (5bar). • The water temperature must be between 10 and 50°C TECHNICAL SPECIFICATIONS • Voltage: 380-415 V3N ~ 50Hz • Total power : 11,3 kW • Amperage: 17 A • Power cord supply size. : 5 x 4 mmq

VISTA POSTERIORE VUE ARRIERE REAR OF MACHINE CANNA PI CARICO CON ATTACCO G 3/4” LUNGHEZZA mm.1500. OUVERTURE DE PASSAGE TUYAU D’ALIMENTATION EAU AVEC CONNEXION G 3/4" L=mm 1500. WATER INLET PIPE CONNECTION G 3/4" L=mm 1500.