TECHNICAL DATA SHEET Mod. AS 60.40E EQUIPMENT • 1 plates rack 60x50 cm (22 plates) • 1 cutlery smaill basket • 1 inlet hose (lenght 2 m) • 1 drain hose (lenght 2,5 m) GENERAL FEATURES • Ra ck size 60x50 cm • Washing cycles / racks/hour : 90”-120”-180’W 40-30-20 • To p and bottom wash/rinse arms • Wash pump 680 W • Bo iler capacity 5 liters • Bo iler heating element 4,5 kW • Ta nk heating element 2,4 kW • Water quantity per cycle: 2 liters • Electronic control with color code switch • Exctractable control panel • Us eful washing height:400 mm • Magnetic door microswitch • Automatic water filling • Bu ilt-in electric rinse-aid dispenser • Bu ilt-in electric detergent dispenser • Hot rinse • Th ermostop function • Anti back-flow valve • Automatic end-of-day self-cleaning water tank • Washing pump with Soft-Start • Green function during pauses FILTRATION • Plastic wash pump filter, easily removable BODY • AISI 304 stainless steel Body • Double skinned body • Preformed rack guides • Preformed wash tank • Double skinned door • Door handle in s/s • Wash/rinse arms in s/s, easily removable • Boiler in s/s AISI 304 • PVC protection rear the bottom front panel OPTIONAL • Drain pump • Rinse booster pump • Cold rinse • S/s tank filters for pre-filtering of tank water • Boiler heating element 6 kW • Commutable voltage • 60 Hz version ACCESSORIES FOR THE WATER TREATMENT • Internal water softener (“S” version) ACCESSORIES • Supporting s/s stand h. 545mm. for basket • Special racks INSTALLATION • Use the screws of the feet and a spirit level to ensure that the machine is levelled MAIN POWER SUPPLY • The voltage of main power supply must be compatible with the rated voltage • The machine must be connected to a suitable earth (ground) system • Connect the machine power socket to the multipole wall switch provided WATER SUPPLY CONNECTION • A water softener must be installed if the water is hard • The water pressure must be between 0.2MPa (2 bar), and, 0.5MPa (5 bar) • The temperature of the water-supply must be between 10°C to 50°C TECHNICAL SPECIFICATIONS • Voltage: 380-415V3N/220-240V3/220-240V~50 Hz • Total power : 5,18 kW • Amperage: 8 A / 13 A / 23 A • Power cord supply size :5x2,5 / 3 x 4 mmq

SCARICO DRAIN VIDANGE USCITA TUBO PI SCARICO 0 INT. mm.23 L=mm.2500 OUVERTURE DE PASSAGE TUYAU DE VIDANGE 0 INT CANNA PI CARICO CON ATTACCO G 3/4” L=mm. 2000. WATER INLET PIPE CONNECTION OUVERTURE DE PASSAGE TUYAU D ALIMENTATION EAU AVEC .USCITA CAVO Dl ALIMENTAZIONE EXIT POWER CORD SUPPLY OUVERTURE DE PASSAGE CABLE D ALIMENTATION VISTA POSTERIORE Min 10'C-MAX 25’C with ENERGY RECOVERY 2«4500kPaf2+5 Bar)