TECHNICAL DATA SHEET Mod. AF 40.30 LS EQUIPMENT AS GLASSWASHER • 2 glass racks 40x40 cm • 1 cutlery small basket • 1 inlet hose (lenght 2 m) • 1 drain hose (lenght 2,5 m) GENERAL FEATURES • Ra ck size 40x40 cm • Washing cycle / racks/hour: 120” /30 • Bottom and top wash/rinse arms • Washing pump 330 W • Bo iler capacity 3 liters • Bo iler heating element 2,8 kW • Ta nk heating element 2,4 kW • Water quantity per cycle: 2 litri • Electromechanical controls • Exctractable control panel • Us eful washing height:300 mm • Magnetic door microswitch • Automatic water fillimg • Bu ilt-in rinse-aid dispenser (adjustable) • Hot rinse • Anti back-flow valve OPTIONAL • Electric detergent dispenser • Electric rinse-aid dispenser • Drain pump • Rinse booster pump • Cold rinse • Kit s/s tank filters for pre-filtering of tank water • 400V3N~50Hz version ACCESSORIES FOR THE WATER TREATMENT • Internal water softener (“S” version) ACCESSORIES • Special racks (Round, diam. cm.40) • S/S Supporting stand h mm. 545 for basket INSTALLATION • Use the screws of the feet and a spirit level to ensure that the machine is levelled MAIN POWER SUPPLY • The voltage of main power supply must be compatible with the rated voltage • The machine must be connected to a suitable earth (ground) system • Connect the machine power socket to the multipole wall switch provided FILTRATION • Plastic wash pump filter, easily removable BODY • AISI 304 stainless steel Body • Pa rtial double skinned body • Preformed rack guides • Preformed wash tank • Do uble skinned door • Do or handle in s/s • Wash/rinse arms in s/s, easily removable • Bo iler in s/s AISI 304 • PVC protection rear the bottom front panel WATER SUPPLY CONNECTION • A water softener must be installed if the water is hard • The water pressure must be between 0.2MPa (2 bar), and, 0.5MPa (5 bar) • The temperature of the water-supply must be between 10°C to 50°C TECHNICAL SPECIFICATIONS • Voltage: 220-240 V / 380-415 V3N~ 50 Hz • Total power : 3,13 kW • Amperage : 14 A /5 A • Power cord supply size : 3x1,5 mmq/5x1,5 mmq

SCARICO DRAIN VIDANGE USCITA TUBO Dl SCARICO (S INT. mm.ZO L=mm.2500 EXIT WATER OUTLET PIPE INT. 0 20 mm. L=mm.2500. OUVERTURE DE PASSAGE TUYAU DE VIDANGE 0 INT. 20 mm. L=mm.2500 GANNA PI CARICO CON ATTACCO G 3/4” L=mm. 2000. WATER INLET PIPE CONNECTION OUVERTURE DE PASSAGE TUYAU D ALIMENTATION EAU AVEC JSCITA CAVO Dl ALIMENTAZONE -XT POWER CORD SUPPLY OUVERTURE DE PASSAGE CABLE D ALIMENTATION VISTA POSTERIORE REAR OF MACHINE Min 10'C-MAX 25’C with ENERGY RECOVERY t00-r500kPa(U5 Bar) with ATMOSPHERIC BOILER ED.02/2019