SERIES 3300
2Pages

Catalog excerpts

Features • 13/4” x 41/2” Front Set Storefront • System offers Pre-Glazing with Concealed Perimeter Anchors • Screw Spline Assembly to Reduce Labor • 9/16” Laminated & 15/16” Insulating Units 0.090 Saflex IIIG 0.100 Saflex HP 0.090 SENTRYGLAS See Florida Product Approval Design Pressure Performance Data LARGE & SMALL MISSLE IMPACT Large and Small Missile tested in acccordance with TAS201, TAS202. & TAS203. Florida Approval including HVHZ: #17586.1 ASTM E283: Air Infiltration shall not exceed 0.01 cfm/ft2 when tested at 6.24psf ASTM E331: No Uncontrolled Water when tested at 14psf. ASTM E330: Maximum Allowable Deflection of L/180 or 3/4” System Details Door Jamb Door Jamb at Transom Intermediate Horizontal Sill Jamb Intermediate Vertical Intermediate Vertical w/ Steel Trulite Glass & Aluminum Solutions is proud to be your True Single Source Supplier of all your needs from Specification Sections: 08400, 08700, 08800 and 08900. Complete System Details are Available on www.trulite.com. 403 Westpark Court, Suite 201 • Peachtree Cit

Open the catalog to page 1

1.01 SUMMARY A. Section Includes: Aluminum Storefront systems 1. Trulite Series 3300 Resistor Storefront System. Florida Building Product Approval: #17586.1 Including HVHZ B. Related Sections: 1. Glass and Glazing: Refer to Division 8 Glass and Glazing Section for glass and glazing requirements. 2. Sealants: Refer to Division 7 Joint Treatment Section for sealant requirements. 3. Single Source Requirement: All products listed below shall be by the same manufacturer. a. Section 08 41 13 Aluminum Framed Entrance Door. b. Section 08 44 13 Glazed Aluminum Curtain Walls. 1.02 SYSTEM PERFORMANCE...

Open the catalog to page 2